Euro-Pro EP700 사용 및 관리 지침 매뉴얼 - 페이지 4

{카테고리_이름} Euro-Pro EP700에 대한 사용 및 관리 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Euro-Pro EP700 8 페이지. Ultra lightweight upright vacuum

Warning: Do not plug in vacuum unit until it is fully assembled.

Carefully unpack all components, set aside packaging.

Place power nozzle section on a flat surface, loosen

clamping collar. Make sure that the power nozzle elbow is

in the vertical and locked position.

Take the middle body section and insert the tapered end

of the dirt tube into the top opening of the power nozzle

elbow. Clamp in place by turning the locking collar

clockwise. (Do not over-tighten.)

To assemble the handle, align the handle tube with the

locking collar on the upper middle body section. Insert the

tube until it is bottomed and then turn locking collar

clockwise until secure. (Do not over-tighten.)

Unwrap power cord and push lower cord guide clip (7) onto dust tube just behind exhaust

grill. Take extra cord guide clip (7) and push onto top handle section. Wrap power cord

using cord storage hooks (6). Upper cord storage hook (6) swivels to make it easy to

unwrap cord before using vacuum cleaner.

Release Power Cord:

The upper cord storage hook (6) has a quick release action. To release cord, rotate

the hook downward and the entire power cord will drop off the hook for immediate

use.

To Store Cord:

Return the cord hook (6) to the upright position before rewinding the cord. Unplug

from wall outlet by grasping the plug and pulling, then rewind cord using upper and

lower cord storage hooks.

Turn Vacuum On and Off:

To start the vacuum cleaner, push (step on) the switch (4)

on top right side of the power nozzle (3).

To stop the vacuum cleaner, push (step on) switch again.

Assembling Your Vacuum Cleaner

Clamping Collar

On/Off Switch