Euro-Pro Shark EP600F 소유자 매뉴얼 - 페이지 9

{카테고리_이름} Euro-Pro Shark EP600F에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Euro-Pro Shark EP600F 10 페이지. Turbo stick vac

페이지 인쇄
Euro-Pro Shark EP600F 소유자 매뉴얼
FAMILIARISEZ-VOUS AVEC VOTRE ASPIRATEUR-
BÂTON TURBO SHARK
Spécifications techniques
Tension :
120 V, 60 Hz
Puissance :
7,5 Amp, 900 watts
*Les illustrations peuvent différer du produit lui-même.
11
TROUBLE SHOOTING GUIDE
PROBLEM
POSSIBLE REASON
1.
Power cord not firmly plugged into
outlet.
VACUUM WILL
2.
No power in wall outlet.
NOT OPERATE
3.
Needs servicing.
4.
Thermostat has tripped.
1.
Dust cup is full.
VACUUM WILL
2.
Unit clogged.
NOT PICK-UP OR
3.
HEPA-Type Filter needs cleaning
SUCTION POWER
or replacing.
IS WEAK
4.
Debris screen needs cleaning.
DUST ESCAPING
1.
Dust cup is full.
FROM VACUUM
2.
Dust Cup is not installed correctly.
VACUUM, HOSE
1.
Hose clogged.
OR BRUSHES
2.
Dust cup is full.
WILL NOT PICK-UP
ORDERING REPLACEMENT DUST CUP FILTERS
TO ORDER REPLACEMENT HEPA-TYPE FILTERS
Item # XSH600
for Models EP600C, EP600F
Call:
Monday to Friday 8:30 A.M. - 5:00 P.M. Eastern Standard Time
visit our website: www.sharkvac.com
FOR TECHNICAL SUPPORT
for Models EP600C, EP600F
Call:
Monday to Friday 8:30 A.M. - 5:00 P.M. Eastern Standard Time
Please Note:
The HEPA-TYPE Filter is washable. It should, however, be replaced every three (3)
months to ensure peak performance of your vacuum.
Both the Pre-Motor and Post Motor Filters are washable. They should however be
replaced every three (3) months to ensure peak performance of your vacuum.
Important:
Make sure that ALL filters have been completely air dried for 24 hours before re-
installing back in the vacuum.
POSSIBLE SOLUTION
1.
Plug unit in firmly.
2.
Check fuse or breaker. Replace
fuse/reset breaker.
3.
Call 1-800-798-7398.
4.
Turn the unit off and unplug from
outlet. Allow unit to cool down,
then restart.
1.
Empty and clean dust cup.
2.
Turn unit off and unplug from
wall outlet. Remove Dust Cup
Filter and check for object(s) in
air duct and remove.
3.
Clean or replace HEPA-Type
Filter.
4.
Clean debris screen.
1.
Empty and clean dust cup.
2.
Review Dust Cup instructions.
1.
Remove hose and/or brushes.
Remove obstruction from hose
and /or brush.
2.
Empty and clean dust cup.
1 (800) 798-7398
or
1-800-798-7398
8