Euro-Pro THE SHARK PLUS EP3005 사용 및 관리 지침 매뉴얼 - 페이지 11
{카테고리_이름} Euro-Pro THE SHARK PLUS EP3005에 대한 사용 및 관리 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Euro-Pro THE SHARK PLUS EP3005 13 페이지. Canister vacuum
페이지 인쇄
Pre-Motor Filter
Your vacuum cleaner is equipped with a filtration system to reduce dust and pollen in your home as you
clean. The white pre-motor filter is located inside the vacuum body behind the dust bag. Check when
changing the dust bag and replace when dirty.
To replace, lift vacuum body cover, then pull the white polyfoam straight up and out of the vacuum body,
dispense of old filter. Hold new filter with narrow round side down and slide into position between the
two posts and the motor intake.
Post-Motor Filter
1.
Remove rear filter by grasping edge, squeezing and pulling towards you. The top of the cover
will become loose and you can remove it by pulling at a slight angle.
2.
Remove filter and dispose of filter.
3.
Insert new filter, making certain to position it over entire air vent area.
4.
Replace rear filter cover by placing the four tabs into the four slots at the bottom of the filter
opening. Push top of cover until it snaps into place.
To order additional bags and filters or for customer service:
Call EURO-PRO Customer Service
In US.:
800-798-7398
Monday to Friday 8:30 AM – 5:00 PM Eastern Standard Time
Replace Dust Filters
In Canada: 800-361-4639
10
Post-motor filter
Pre-motor filter
514-842-8691