Canon Digital IXUS 90 IS 사용자 설명서 - 페이지 2
{카테고리_이름} Canon Digital IXUS 90 IS에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Canon Digital IXUS 90 IS 7 페이지. For camera-to-camera data transfer
Canon Digital IXUS 90 IS에 대해서도 마찬가지입니다: 브로셔 (44 페이지), 부품 카탈로그 (13 페이지), 시작하기 매뉴얼 (37 페이지), 시작하기 매뉴얼 (36 페이지), 시작하기 (41 페이지)
페이지 인쇄
Transferring Images via a Wireless Connection
Registering Your Camera Name
First, select a name for your camera and register it.
1
Slide the mode switch to
(Wireless) Menu
Refer to the Camera User Guide for your camera for details on
Menu operation.
2
Set up name and press
You can set up the camera name with up to 5 letters. Select let-
ters using the
move forward or backward. Capital letters and numbers can be
used for the camera name.
The default setting is [AAAAA].
If you do not wish to register a name, press the MENU button.
Registering Target Camera
Register the name of the camera you wish to connect to your camera via a wireless connection.
You must follow the following procedures for both your own and the target camera.
1
Slide the mode switch to
(Wireless) Menu
2
Select [Camera] for target device and press
3
Make sure that your camera displays your camera's
name and that the target camera displays its camera
name and press the
neously (within approximately 10 seconds).
This step connects your camera to the target camera and registers
each camera's name in the other camera as a target device.
When the wireless connection starts, the wireless lamp will begin to blink blue.
When you wish to change the name, follow Step 2 in Registering Your Camera Name (p. 2).
(Playback)
[Set Camera Name]
.
or
button, and press the
(Playback)
[Reg. Target Device]
on both cameras simulta-
or
button to
.
2