Euro-Pro S3306HB 소유자 매뉴얼 - 페이지 8

{카테고리_이름} Euro-Pro S3306HB에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Euro-Pro S3306HB 8 페이지. Hard surface steam cleaner 120v., 60hz, 1500 watts

페이지 인쇄

OPERATING INSTRUCTIONS

Using the Trigger Lock

The steam cleaner has a steam trigger

lock that automatically engages when

you depress the steam trigger. (Fig. 2)

To unlock the steam trigger, just press it

in the direction of the hose.

Steam

Trigger Lock

Fig. 2

Using Your Steam Cleaner with

Steam Pocket

Step 1. Connect the steam pocket

accessory to the steam handle

with two extension tubes. To

attach the extension tubes one

onto the other or onto the hand

grip, press the locking button

ensuring that it fits into the hole

(Fig. 3., Fig. 4) and press the two

sections together. To disconnect,

repeat the operation by pressing

the locking button and pulling the

two sections apart.

Locking Button

Hand Grip

Fig. 3

Fig. 4

Note

Fit the steam pocket frame with the

angle adapter onto the extension tube.

Step 2. If the angle adapter is not

attached to the steam pocket

frame, attach as follows: Hold

the steam pocket frame in one

hand and the

angle adapter in

the other. Insert

the angle adapter

steam into the

opening of the

steam pocket

frame as shown in Fig. 5. Note

that the flat on the nozzle must

face toward the side of the

frame with the brass pin. Once

inserted, rotate it 90°.

Step 3. Insert the electrical power cord

into the outlet. Heating time is

approximately 4-6 minutes with

cold water. Filling the steam

generator with hot water will

shorten the heat up time.

Attaching the Steam Pocket

Towel to the Frame

Warning:

Always insure the unit is

"UNPLUGGED" from the wall receptacle

prior to attaching or removing accessories.

1. Slide the steam

pocket towel over

the steam pocket

frame. (Fig. 6)

2. Bring the towel all

the way to the top

of the steam

pocket frame.

(Fig. 7)

3. Bring the hook and

latch strips that are

on the back side of

the steam pocket

towel over the

steam pocket frame

and attach to

the inside of the

front side of the

steam pocket towel.

(Fig. 8)

Note: If replacing the steam pocket

towel, make sure that the steam pocket

frame has been allowed to cool before

removing or attaching a new steam

pocket towel.

Care & Maintenance of the Steam

Pocket Towel

Due to the unique cleaning ability of this

cloth, proper care of your micro-fiber towel

is required to ensure long life and

continued cleaning ability.

• The first thing you should do when

you get a new micro-fiber towel is to

wash and dry it. During the

manufacturing process the fabric has a

tendency to become flat as it picks up

contaminants from the air and

Fig. 5

machinery. There will also be a number

of loose threads that, while they cause

no harm, can be annoying the first time

you use the towel.

• To clean the towel, simply wash it in your

washing machine using the warm water

setting.

• Always wash your towels separately

from other fabrics. They have a tendency

to pick up lint and other particles from

other fabrics and the next time you use

your towel, this lint will transfer to the

surface being cleaned.

• ONLY USE LIQUID DETERGENTS,

never use dry detergents as many times

the granules do not fully dissolve and

become trapped in the towel. This can

scratch the surface that you are

cleaning.

• NEVER USE BLEACH OR FABRIC

SOFTENERS! Bleach will damage the

micro-fiber fabric and fabric softeners

deposit a coating on the micro-fiber

fabric what will not allow the cloth to

Fig. 6

clean efficiently.

• Air dry the towel. Do not put in a clothes

dryer as high heat will cause the towel to

shrink and the micro-fibers to break

down.

• If you wash your towel on a regular basis

and don't let them get too dirty, they will

Fig. 7

last much longer. As with any fabric, dirt

particles, grease and other contaminants

can cause the fibers to break down,

therefore regular cleaning will help

preserve your micro-fiber towels.

• As you use the micro-fiber towel, you will

notice that sometimes a thread will

Fig. 8

loosen or pull out. This is normal and

you should NEVER PULL AT THE

LOOSE THREAD! Pulling the thread can

cause the weave to come undone.

Instead, simply trim the thread with a

pair of sharp scissors.

OPERATING INSTRUCTIONS

Caution

: Be aware of hand placement

and take care not to actuate the steam

discharge switch while installing or

removing accessories.

Attaching the Accessories to the

Flexible Steam Hose

Allow the unit to cool for 5 minutes

before changing accessories.

Window Squeegee

This attachment is very useful for

cleaning large windows, plastic

material, ceramic, tiled or marble

surfaces.

Important:

always avoid any sudden changes in

temperature to prevent glass

breakage or cracks.

To use: Connect the window

squeegee to the hand

grip or use with

extension tube for

hard to reach surfaces.

Apply steam abundantly, then remove

excess water and dirt with the glass

wiping edge.

Extended Concentrator

Use the extended concentrator

to clean under toilet rims

and hard to reach places.

To use: Attach the extended

concentrator to the handgrip or to

the extension tubes.

Nylon Bristle Brush (x2)

It is best for cleaning grout in-between

the tiles, ceramic and marble.

To use: Screw on the nylon

bristle brush on to the end

of the extended

concentrator, which

then may be used directly

on the hand grip or with extension

tubes.

When cleaning windows,