Canon Digital REBEL XTi 400D 기능 설명서 - 페이지 4

{카테고리_이름} Canon Digital REBEL XTi 400D에 대한 기능 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Canon Digital REBEL XTi 400D 5 페이지. Expodisc custom white balance procedures

페이지 인쇄

Canon 1D Mark II and 1Ds Mark II

1. Install the ExpoDisc and set the camera to Manual Focus mode.

2. Allow the camera to set an automatic exposure using the "P", "S" or "A"

modes or set the correct manual exposure in "M" mode.

3. Press and hold the white ʻWBʼ button while turning the thumb dial to select the

custom WB icon (

4. Aim the camera towards the light illuminating the subject and press the

shutter release button.

5. Press the ʻMENUʼ button to access menu system.

6. Press and hold the ʻSELECTʼ button and rotate the thumb dial to access the

ʻcamera recording sub menuʼ <camera icon>, then release the ʻSELECTʼ

button.

7. Press and hold the ʻSELECTʼ button and scroll down to ʻCustom WBʼ then

release the ʻSELECTʼ button.

8. Press and hold the ʻSELECTʼ button and rotate the thumb dial to select the

last picture taken, then release the ʻSELECTʼ button.

9. Press and hold the ʻSELECTʼ button and rotate thumb dial to select ʻOKʼ then

release the ʻSELECTʼ button.

10. Press the ʻMENUʼ button to exit menu system.

11. Remove the ExpoDisc, return camera to Auto Focus if desired, and start

shooting.

Canon 1D Mark IIn

1. Install the ExpoDisc and set the camera to Manual Focus mode.

2. Allow the camera to set an automatic exposure using the "P", "S" or "A"

modes or set the correct manual exposure in "M" mode.

3. Aim the camera towards the light illuminating the subject and press the

shutter release button.

4. Push the ʻMENUʼ button.

5. Press and hold the ʻSELECTʼ button and rotate the thumb dial to access the

ʻcamera recording sub menuʼ <camera icon>, then release the ʻSELECTʼ

button.

6. Press and hold the ʻSELECTʼ button and scroll down to the ʻCustom WBʼ then

release the ʻSELECTʼ button.

7. Press and hold the ʻSELECTʼ button and rotate the thumb dial to select the

last picture taken, then release the ʻSELECTʼ button.

8. Press and hold the ʻSELECTʼ button and rotate the thumb dial to select ʻOKʼ

(it will turn green), then release the ʻSELECTʼ button.

9. Push the ʻMENUʼ button to exit the menu.

10. Press and hold the ʻWBʼ button while turning the thumb dial to select the

"Canon" and the Canon camera models listed are Trademarks of Canon, Inc.

) in the control panel, then release the ʻWBʼ button.