Canon Eos 1ds mark ii 사용 설명서 - 페이지 35
{카테고리_이름} Canon Eos 1ds mark ii에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Canon Eos 1ds mark ii 41 페이지. Full line product guide spring 2009
Canon Eos 1ds mark ii에 대해서도 마찬가지입니다: 사용 설명서 (28 페이지), 소프트웨어 설명서 (2 페이지), 소프트웨어 설명서 (2 페이지), 제품 설명서 (39 페이지)
페이지 인쇄
Click White Balance Function
Makes white the standard for the point you selected and color in the image is adjusted.
Click the [Click] button.
1
When you move the cursor over the
image, the cursor [ ] changes to [
Click the point where is to be the standard.
2
The color in the image is adjusted with white as the standard on the point you
selected.
If you click on another point over the image, the white balance is adjusted again.
When you finish this operation, click the [Click] button.
The image is adjusted based on the value of 1
Even if you have selected a neutral gray point of the image, the result of adjustments is
the same as when you select a white point.
].
1 pixels from the clicked point.
Adjusting the Luminance and Contrast
You can adjust the luminance and contrast in the range of –100 to +100 (in 1-stop increments
when entering a value).
Adjust an image while viewing it.
Drag the slider left or right to adjust the luminance and contrast.
Adjusting the Hue, Saturation and Sharpness
You can adjust the hue in the range of - 30 to +30 (in 1-step increments when entering a value),
the saturation in the range of 0 to 200 (in 1-step increments when entering a value) and the
sharpness in the range of 0 to 500 (in 1-step increments when entering a value).
Adjust an image while viewing it.
Drag the slider left or right to adjust the hue, saturation sharpness.
Enter a value to adjust the
luminance and contrast.
Restores the image to its original settings.
Enter a value to adjust the
hue, saturation and
sharpness.
2-8
Cover/Table of
Contents
Introduction
Displaying Thumbnail Images
1
and Performing Basic Edits
in the Main Window
2
Performing Detailed
Edits in the Edit
Window
3
Performing Detailed
Edits in the Edit
Image Window
Displaying an
4
Image in the Quick
Check Window
5
Reference
Index