Canon EOS 350D 펌웨어 업데이트 절차 - 페이지 2

{카테고리_이름} Canon EOS 350D에 대한 펌웨어 업데이트 절차을 온라인으로 검색하거나 PDF를 다운로드하세요. Canon EOS 350D 6 페이지. For windows
Canon EOS 350D에 대해서도 마찬가지입니다: 브로셔 및 사양 (8 페이지), 사용 설명서 (28 페이지), 사용 설명서 (41 페이지), 소프트웨어 설명서 (2 페이지), 소프트웨어 설명서 (2 페이지)

페이지 인쇄

Firmware Update Procedures

In the following instructions, x.x.x. indicates either the current firmware version or the firmware version

for the update.

e3kr2xxx.exe

("xxx" will be different for each firmware

version.)

EOS DIGITAL REBEL XT / EOS 350D DIGITAL Firmware Update Procedures

(1) Format the CF Card

Be sure to carefully review the contents of the CF card

before formatting.

Insert the CF card into the camera, and turn on the Main

Switch. Press "MENU" button and select the tools "Setup"

menu. And then select "FORMAT" and then accept the

confirmation to initialize the CF card.

* For firmware update, be sure to use a blank CF card

formatted with the camera.

(2) Download the firmware update file from the Web

page.

The file for updating the camera's firmware can be

downloaded from the Web page. Please download the

compressed, self-extracting file that matches your

computer's operating system.

Extract the file downloaded from the Web and create the

firmware update file. Copy the firmware update file in the

first window that appears when the CF card is opened (the

root directory).

The name of the firmware update file is "e3kr2xxx.fir".

("xxx" will be different for each firmware version.)

The name and size of the firmware update file can be

checked on the Web site.

Windows

Double-click the downloaded file.

Clicking "OK" will cause the file's contents to be extracted

and the firmware update file to be created. (Click "Browse"

to select a destination for the extracted files. This

destination may be different from the path initially

displayed, "C: ".)

Confirm file size of the firmware update file. If the file

size differs, please download the file again from the Web

site.

You can confirm this by right-clicking the icon and

selecting the Properties command from the pop-up menu

that appears.