Akura APTMIC 771AR 사용 설명서 - 페이지 9

{카테고리_이름} Akura APTMIC 771AR에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Akura APTMIC 771AR 12 페이지.

PROGRAM

Up to 20 tracks can be programmed for disc play in any order.

Be sure to press the "STOP" button before use.

1. Press the "PROGRAM" button, the display will show "01" and flash.

2. Select desired track by using the "SKIP +" or "SKIP -" button.

3. Press the "PROGRAM" button again to confirm desired track into the program memory.

4. Repeat step 2 and 3 to enter additional tracks into the program memory.

5. When all the desired tracks have been programmed. Press the "PLAY / PAUSE" button to play the

disc in the order you have programmed and the program indicator flashes.

6. Press the "STOP" button twice to terminate programmed play and the program indicator will turn off.

REPEAT

Press the "REPEAT" button before or during playing CD, a single track or all the tracks can be repeated.

Each press switches the repeat mode as follows:

1 - REPEAT 1 ( The repeat indicator is flashing. )

2 - REPEAT ALL ( The repeat indicator is steadily on. )

3 - NORMAL PLAYBACK

ON HANDLING DISCS

Do not touch the playback side of the disc.

Do not attach paper or tape to disc.

CD OPERATION

Fingerprints and dust on the disc casue picture

and sound deterioration. Wipe the disc from the

centre outwards with a soft cloth. Always keep

the disc clean.

If you can not wipe off the dust with a soft cloth,

wipe the disc lightly with a slightly moistened soft

cloth and finish with a dry cloth.

Do not use any type of solvent such as thinner,

benzine, commercially available cleaners or anti-

static spray for vinyl Lps. It may damage the disc.

Page 8

REPEAT 1

REPEAT ALL

ON CLEANING DISCS

NORMAL

PLAYBACK