Akura ADDS303 매뉴얼 - 페이지 10

{카테고리_이름} Akura ADDS303에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Akura ADDS303 17 페이지.

페이지 인쇄

Preparations

When you want to view a disc, turn on the TV and

select the video input connected to the DVD player.

Basic playback

1. Press POWER in the front panel, the DVD player

turns on and the TV screen will display the start

logo. If a disc is already in the tray, it will begin

to play once the power is on.

2. Press OPEN/CLOSE

to open the disc tray,

place a disc on the disc tray.

There are two different disc sizes. Place the

disc in the correct guide on the disc tray. If the

disc is out of the guide, it may damage the disc

and cause the DVD player to malfunction.

Do not place a disc which is unplayable in this

DVD player.

3. Press OPEN/CLOSE to close the disc tray, the

playback will automatically start.

Some discs may not playback automatically,

you can press ENTER/PLAY

playback.

4. Some discs may start playback with a menu,

use the cursor button on the remote control to

select menu options and press ENTER/PLAY

to start, or press digits to select a menu options

directly.

IMPORTANT NOTE:

THE FOLLOWING FUNCTIONS ARE APPLICABLE ONLY TO DVD DISCS. IF OTHER DISC FORMATS ARE

PLAYED, SCREEN DISPLAY AND OPERATION WILL BE DIFFERENT.

V.MODE

This button can set VIDEO output among "CVBS",

"YUV", "P-Scan" or "RGB" .

Note: The screen disappear when press this button,

press this button continuously until the screen turn

normal.

If there are picture interferences or no picture,

please press "V.MODE" to correct it.

OSD

Press this button and the screen will display some information about disc, such as : " Title Elapsed " , " Title

Remain ", " Chapter Elapsed ", " Chapter Remain " and " Display Off ".

Fast forward and Fast reverse

1. Press F.FWD

Each time the F.FWD

fast forward motion speed changes.

2. Press ENTER/PLAY to resume normal playback.

3. Press F.REV

Each time the F.REV

fast reverse motion speed changes.

4. Press ENTER/PLAY to resume normal playback.

Pause playback

1. Press PAUSE

The sound will be muted during still mode.

2. Press ENTER/PLAY or PAUSE to resume normal

playback.

Single step playback

1. Press STEP

to the next frame in the video.

2. Press ENTER/PLAY to resume normal playback.

button to start

NOTES:

SUBTITLE

Press this button and the screen will display "SUBTI-

TLE 01/XX XXXXX", "01" indicates the ordinal

number of this language; "XX" indicates total number

of language; "XXXXXX" indicates the language of

country. (the number of language depends on disc).

BASIC PLAYBACK

to fast forward through the disc.

button is pressed, the

to fast reverse through the disc.

button is pressed, the

to pause playback (still mode).

continuous to single step forward