Akura ADDS303 매뉴얼 - 페이지 14
{카테고리_이름} Akura ADDS303에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Akura ADDS303 17 페이지.
페이지 인쇄2.1.1 DOWNMlX SETUP
DOWNMIX MODE: Sets front speakers to LT/RT
STEREO.
The first 2 settings (LT/RT, STEREO) downmix
the sound Signal for 2-Speakers. This setting
allows you to enjoy a surround sound effect with
onIy two speakers. For this reason a setup for
additional speakers (described in the following
sections) is disabled when DOWNMlX MODE is
set to these settings.
2.2 SPDIF SETUP PAGE
2.2.1 Spdif Output
SPDlF OUTPUT MODE: Sets the audio outputs.
Under the status of SPDIF/RAM , can not adjust
volume of DVD, CD , it can only adjust under the
MP3 format.
SPDIF the abb reviation of
Sony Philips Digital
Interface Format
.
This DVD player includes three kinds of audio output:
1. SPDlF OFF: An analog surround sound format is
output through the back-paneI connections for L, R.
2. SPDlF/RAW or SPDIF/PCM: This surround sound
format is output to a Dolby Digital decoder through
the optical and coaxial connectors on the back -
panel of the product.
2.3 HDCD
Please choose the sampling frequencies of the digital
filter, the higher the sampling frequencies are, the
clearer the audio quality is. When default setting is
off, it will display "CD" by reading HDCD, for HDCD
playback, please choose 44.1K or 88.2K.
3. DOLBY DIGITAL SETUP PAGE
Dolby
General
Audio
Dolby Digital Setup
Dual Mono
Dynamic
Go To Dolby Digital Setup
3.1 DUAL MONO
DUAL MONO:
If your amplifier / decoder has
Dolby Digital output, you may select stereo, left
mono, right mono, or mixed mono mode for your
amplifier decoder.
3.2 DYNAMIC
DYNAMIC: This function is generally used when
playing high volume programs at night, in order
to minimize disturbances . This setting can dyna-
mically lower the volume and still keep the original
tone quality. This is the range, measured in deci-
bels(dB), between the loudest and the quietest
sound registers in a soundtrack.
4. VIDEO SETUP PAGE
Dolby
General
Audio
Video Setup Page
Component
RGB
Tv Mode
Sharpness
Middle
Go To Video Setup Page
4.1 COMPONENT
COMPONENT: Sets the video output.
13
SYSTEM SETUP
Video
Preference
Video
Preference