Barnes MEK-18 사용 설명서 - 페이지 3

{카테고리_이름} Barnes MEK-18에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Barnes MEK-18 12 페이지.

페이지 인쇄

Hand Extruder MEK-18 / MAK-18

1 General

These operating instructions must always

be available at the place of use of the hand ex-

truder.

The objective of these operating instructions is to

support operators in familiarizing themselves with the

hand extruder and in using its functions for the in-

tended service.

These operating instructions provide important in-

formation for the safe, workmanlike and economical

operation of the hand extruder. Their observance

helps avoid danger, minimize repair costs and down-

times, enhance reliability, and extend the service life

of the hand extruder.

These operating instructions must be observed by all

persons working with/on the hand extruder. Such

work includes, for instance:

•

operation,

•

maintenance, inspection and repair

•

transport.

The hand extruder may only be mounted, operated

and maintained by trained personnel.

In addition to the operating instructions and the na-

tional and local accident prevention regulations ap-

plicable at the place of use, the acknowledged tech-

nical rules for safe and proper working practices

must be observed.

These operating instructions provide basic informa-

tion to be observed for operation and maintenance.

For this reason, it is imperative that they be read by

the specialist personnel/Operator prior to placing the

hand extruder in service and that they always be

available at the place of use.

Apart from the general safety instructions under sec-

tion "Safety", also the special safety instructions

given under the respective sub-sections must be

adhered to.

Non-observance of the safety instructions

may cause hazards to persons and the environment

or damage to the hand extruder.

Moreover, failure to observe the safety instructions

may lead to the forfeiture of any damages.

Page 4/20

Non-observance of the safety instructions may in

particular involve the following risks:

• failure of important hand extruder functions,

• hazards to persons due to electrical and me-

chanical impacts including risk of burns,

• hazards to the environment due to vapour-phase

hazardous substances,

• risk of fire.

2 Safety

These operating instructions provide basic informa-

tion to be observed for operation and maintenance.

For this reason, it is imperative that they be read by

the specialist personnel/Operator prior to placing the

hand extruder in service and that they always be

available at the place of use.

Safe operation of the hand extruder presupposes

that the instructions under section 1 – General – of

these operating instructions are complied with. In no

case must the limit values indicated be violated.

Intact and unaltered hand extruders conform to the

applicable codes and standards and meet all regula-

tory limit values regarding EMC (electromagnetic

discharges and interference immunity). For the coun-

try-specific limit values to be observed, the Operator

should consult the local electric utility. Nevertheless,

the hand extruders emit electromagnetic fields within

the acceptable limits. Electromagnetic fields may

interfere with the operation of vital electronic devices

(e.g. cardiac pacemakers). Persons wearing a car-

diac pacemaker should therefore consult their physi-

cian before using the machine.

In addition to the operating instructions and the na-

tional and local accident prevention regulations ap-

plicable at the place of use, the acknowledged tech-

nical rules for safe and proper working practices

must be observed.

Apart from the general safety instructions under sec-

tion "Safety", also the special safety instructions

given under the respective sub-sections must be

adhered to.

Any working practices posing a safety risk are pro-

hibited.

Issue 08.2008/Rev. 00

MUNSCH Kunststoff-Schweißtechnik GmbH