DOMPEL CADEIRA TEXAS 사용 설명서 - 페이지 4
{카테고리_이름} DOMPEL CADEIRA TEXAS에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. DOMPEL CADEIRA TEXAS 6 페이지.
페이지 인쇄ENGLISH
LOCATION OF INSTALLATION
Install your Dompel product in a level place with no grooves or splices, preventing rocking
and vibration. The location must be airy and it must not allow straight sunlight and it must be
product outdoors.
SECURITY
Avoid accidents. After unpacking the product, keep all the packing material far way from
kids.
CLEANING AND MAINTENANCE
Do not use metal spatulas, brushes and cleaning agents such as alcohol, acetone,
kerosene, gasoline, bleach, thinner, solvents, acids, vinegar or other chemicals or
abrasives not recommended in this manual. To clean it easily, it is recommended to use
a solution with warm water and neutral soap and after dry carefully. In case of chemicals
reaching the upholstery, clean as soon as possible, preventing products from staining or
drying fabric. Plastic parts can't be washed with boiling water. The chrome-plated metal
components can be cleaned with a soft, dry cloth, and silicone-based automotive wax can
be used to increase gloss and durability, in which case perform the task following the wax
manufacturer's instructions. Do periodical cleaning on your equipment, accumulated dust
can affect the beauty of the product.
INSTALLATION AND ASSEMBLY
Remove all the components from the package and follow the steps below.
1
1 - Assemble the backrest set (B) to the
seat set (A). Fasten the 04 screws (M6 x
30-AB) (E) using an Allen key (4 mm).
3
IMPORTANT
Texas
MERELY ILLUSTRATIVE IMAGES.
Products may suffer changes in its components without prior warning. If any questions,
contact Dompel.
2
2 - Assemble the footrest (C) on the
bottom of the seat set (A). Fasten the 04
screws (M6 x 40-SX) (E) using a hexagon
wrench (M10) the screws will be pre-
fastened to the seat.
3 - Manually attach the headrest (D) to the
backrest adjustment support (B).
Texas Wood
There are 02 footrest
options (C) for the Texas
chair as shown: