air choice OH907R 소유자 매뉴얼 - 페이지 4

{카테고리_이름} air choice OH907R에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. air choice OH907R 9 페이지. Oil heater

POSITIONING THE HEATER



Place the unit in an upright position on a flat, stable and heat- resistant surface.



Ensure that there are no flammable or heat-sensitive materials or substances within one metre of the

front and 50 cm of the rear and sides of the unit. Using the heater in another position can be dangerous.



Before inserting the plug into a suitable wall outlet, make sure that the unit is intact, properly assembled

and that the cord is not damaged. To avoid overloading a circuit, connect the unit only to a circuit where

no other equipment is connected.



When the power switch is in the OFF position [0], insert the plug into an earthed outlet and turn on the

power.



Turn the power switch on the side of the unit to the "On" position to power the unit. On the display

screen, the power symbol lights up.



Press the "Power" button on the control panel or remote control to turn on the unit. The unit starts to

operate with high power.



On the display screen, the "high power" and "°F" symbols light up, as well as the default temperature or

the last set temperature.



Press the On/Off button to stop the operation and put the unit into standby mode. Only the power

symbol remains lit on the display screen.



Turn the power switch on the side of the unit to the OFF position to turn off the power to the unit.

SELECTING A POWER LEVEL

Press the Mode button repeatedly to select a power level :



Low power ( 600W)



Medium power ( 900 W)



High power ( 1 500W)

On the display screen, the symbol for the corresponding power level lights up.