American Standard Diverter Valve Trim T555.430 사양 시트
{카테고리_이름} American Standard Diverter Valve Trim T555.430에 대한 사양 시트을 온라인으로 검색하거나 PDF를 다운로드하세요. American Standard Diverter Valve Trim T555.430 2 페이지. American standard town square in-wall diverter valves specification sheet
페이지 인쇄
ALL CONNECTIONS 1/2" NPT
71mm
(2-3/4)
GENERAL DESCRIPTION:
In-Wall Diverters: Rotational control alternates water flow
between two (R420) or three (R430) different shower outlets
(i.e. showerhead, handspray, body side spray or tub spout).
Forged brass valve body. Mixed water inlet and two (R420) or
three (R430) outlets are marked on back of valve body. 1/2"
NPT connections on mixed water inlet and two (R420) or three
(R430) outlets.
Stamped brass escutcheon. Tub port with
increased water flow (see chart).
NOTE:
Cannot be used as a shut-off valve.
SUGGESTED SPECIFICATION
Two (three) way diverter shall feature a forged brass body with 1/2" NPT mixed water inlet and outlets. Fitting shall be
American Standard Model # T555.430.___ (Diverter Valve Trim) and R4_0. (Rough Valve Body).
© 2008 AS America Inc.
66mm MAX.
(2-5/8)
57mm HOLE SIZE
(2-1/4)
41mm MIN.
(1-5/8)
FINISHED
WALL
F73
IN-WALL DIVERTER VALVES
MODEL NUMBER:
TRIM KITS:
T555.430 Diverter Valve Trim
Valve Trim ONLY. L ESS Valve.
ROUGH VALVE BODIES:
R420 Two-Way In-Wall Diverter Valve Rough
1/2" NPT inlets/outlets. Less Handle.
R430 Three-Way In-Wall Diverter Valve Rough
1/2" NPT inlets/outlets. Less Handle.
NOTE:
Cannot be used as a shut-off valve.
FINISHED
WALL
PRODUCT FEATURES:
Solid Brass Construction:
prolonged contact with water.
Removable Plaster Guard:
installation prior to installing trim parts.
Choice of Finishes:
Wide range of durable finishes.
TOWN SQUARE
75mm
(2-7/8)
Durable, ideal material for
Permits checking of valve
®