DOMUS LINE ATOM SP 설치 매뉴얼 - 페이지 6

{카테고리_이름} DOMUS LINE ATOM SP에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. DOMUS LINE ATOM SP 14 페이지.

INSTALLATION MANUAL

support, applying light pressure until it is completely fitted as

illustrated in figure 5.

- If necessary, bore a ø ≥ 8mm exit hole for the power supply

cable as illustrated in figure 6.

CONNECTING THE DEVICE TO THE POWER SUPPLY

- Connect the device power cable to an appropriate (check plate

data printed on the product label) safe power supply with

stabilised voltage (not included) with power 10% higher than the

total load.

- If more than one device must be connected to the power

supply ensure that the total sum of the power absorbed by the

devices (check the plate data shown on the product label) does

not exceed the maximum power permitted by the Converter.

- DOMUS Line guarantees the product only if powered with a

Converter supplied by us.

WARNING

The Led MODULE, the power supply cable or any switch used,

are not replaceable, therefore in case of damage the device

must be entirely substituted.

WARRANTY

- The warranty on the device is valid only if powered by a power

supply provided by DOMUS Line. The warranty's general terms

and conditions for this device are available at