American Standard Metering 1340.225 설치 지침

{카테고리_이름} American Standard Metering 1340.225에 대한 설치 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. American Standard Metering 1340.225 3 페이지. American standard center set faucets installation instructions

페이지 인쇄

METERING

Center Set Faucets

Thank you for selecting American-Standard...the

benchmark of fine quality for over 100 years.

To ensure that your installation proceeds

smoothly--please read these instructions carefully

before you begin.

TOOLS REQUIRED

Tubing Cutter

INSTALL FAUCET

CAUTION

Turn off hot and cold water supplies before beginning.

Apply a bead of PUTTY along the edge of the

underside of the FAUCET (1).

Insert faucet SHANKS through holes of SINK or

MOUNTING SURFACE.

Install GASKET (2), FRICTION WASHER (3), DEEP

WASHER (4) and LOCK NUT (5). onto SHANKS (6).

Tighten LOCK NUTS (5) firmly to secure FAUCET (1).

PUTTY

Installation

Instructions

1340.225

1340.255

1340.265

Channel Locks

SHANK

SINK OR

MOUNTING

SURFACE

1340.225

Adjustable Wrench

Plumbers' Putty or Caulking

MAKE WATER SUPPLY CONNECTIONS

NOTE: FLEXIBLE SUPPLIES OR BULL-NOSE RISERS MUST BE

PURCHASED SEPARATELY.

Connect water supply to FAUCET (1) with 1/2" IPS FLEXIBLE

SUPPLIES (1) or 3/8" O.D. BULL-NOSE RISERS (2).

Use adjustable wrench to tighten connections. Do not over

tighten. Be careful not to kink copper supply when bending.

Use tubing cutter to cut to proper length.

1340.255

1340.265

Certified to comply with ANSI A112.18.1

2.5mm Hex Wrench

COUPLING NUT

FERRULE

968493