DOMUS LINE BLOK 설치 매뉴얼 - 페이지 6

{카테고리_이름} DOMUS LINE BLOK에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. DOMUS LINE BLOK 9 페이지.

INSTALLATION MANUAL

WARNING

Safety is guaranteed if these instructions are followed

and therefore they must be kept. Installation may

require qualified personnel to be involved. Before

proceeding with installation of the device ensure that

the environmental conditions are in compliance with

and suitable for the product characteristics. Before

carrying out any operation on the device remove

mains power.

TECHNICAL DATA

- 220Vac switch: max. 500W

- SCHUKO 220Vac socket: max. 1500W

INSTALLATION (fig. 1)

- Fix BLOK to the surface using the appropriate screws

(A) and spacers (B) supplied by passing them through

the holes on the support, then cover the screws (A)

with the enclosed plugs (C).

ELECTRICAL CONNECTION (fig.2)

- Disconnect the mains voltage.

- The power supply cable connection to the 230V

power supply must be performed using the

connecting box (F).

- the power supply cable must not be accessible after

installing the device.

- If the cable needs to be secured, only use insulated

clips or plastic cable ties.

- If the connection box supplied is not used, use

connection devices that are certified in accordance

with the EN60998 certification standard.

- Store this connection device in an adequately-sized

box.

WARNING

- Do not use the device if the power cable and/or the

connection cables are defective. Defective cables

and/or connectors must be immediately replaced by

qualified personnel authorised by DOMUS Line.

- Do not allow the cable to pass over hot parts.

- The warranty on the device is valid only if powered

by a power supply provided by DOMUS Line. The

warranty's general terms and conditions for this

device are available at www.domusline.com