180 INNOVATIONS KD-2250 사용 설명서 - 페이지 4

{카테고리_이름} 180 INNOVATIONS KD-2250에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. 180 INNOVATIONS KD-2250 8 페이지. Digital temple thermometer

Explanation o f S ym b o ls

Power on, off

Low battery indicator

MEM

Memory indicator

Delete memory

Wait for next measurement

Device is off

Manufacturer

Please read thoroughly before using

Warning and Caution

YYMM : Lot Number composed by year(Y) and

month(M) of manufacture.

Ba tt er y Instal l atio n

WARNING

Use only same type of alkaline batteries to avoid incompatibility.

1. Replace with 2 new AAA batteries simultaneously when the low

battery indication appears.

2. Remove batteries if the device is not likely to be used for a long

period of time.

3. Do not dispose the batteries in a fire, the batteries will explode.

B a tt er y I n s ta l l at i o n

REPLACE BATTEY

1. Remove the battery cover to insert batteries.

2. Confirm the polarity (+ and -) of batteries are correct as indicated

inside the compartment and insert batteries accordingly.

3. Replace the battery cover.

Se t ti n g

S e tt in g ° C o r ° F S c a l e

1. To set or reset the scale (°C or °F) you must begin

with the device being powered off.

2. Press and release the ON/OFF button to turn on

the device.

3. As soon as you hear a short beep, immediately

press the ON/OFF button again but hold down for

about 2 seconds until you see the °C or °F change.

Release the button as soon as change occurs.

4. Press and hold the ON/OFF button again for 2

seconds to switch back and forth from °C to °F.

5. Whichever scale shows when you release the ON/

OFF button will be the scale the device will show

for the measurement.

6. The device will be ready for measuring after the

hourglass disappears and you hear two short

beeps.