Air Comm Systems ACS 2010 작동 및 설치 매뉴얼 - 페이지 5

{카테고리_이름} Air Comm Systems ACS 2010에 대한 작동 및 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Air Comm Systems ACS 2010 10 페이지. Single audio mixer panel
Air Comm Systems ACS 2010에 대해서도 마찬가지입니다: 작동 및 설치 매뉴얼 (10 페이지)

페이지 인쇄

ACS 2010 Operations and Installation Manual

Interface Schematic

■ Connector Pin-out

The ACS 2010 wiring harness should be constructed of Tefzel aircraft wire (M22759/16 grade). Power and

ground wires should be 18 or 20 AWG, and all other wires may be 22 AWG. Shielded wires should be used

where noted. Adequate protection against wear and chafing should be taken by using a braided cable sleeving

or jacket. Before completing installation, verify that all cable connector pins are seated properly and that the

connector is securely mounted to the unit mating connector.

Pre-fabricated cable harnesses are available from Air Comm to expedite installation — consult our sales

department for details.

Air Comm Systems, Inc.