American Standard Reminiscence Elite Whirlpool 2908EC 설치 지침
{카테고리_이름} American Standard Reminiscence Elite Whirlpool 2908EC에 대한 설치 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. American Standard Reminiscence Elite Whirlpool 2908EC 4 페이지. High gloss acrylic shown less all fittings whirlpool
페이지 인쇄REMINISCENCE
ELITE DROP-IN™
HIGH GLOSS ACRYLIC
SHOWN LESS ALL FITTINGS
330mm
(13)
457mm
229 x 305mm
(18)
(9 X 12)
FLOOR
CUTOUT
914mm
(36)
64mm REF.
INTEGRAL
(2-1/2)
FITTING DECK
ON/OFF
SWITCH
152mm
(6)
C/L OF
DRAIN
OUTLET
RIM AT
DRAIN END
HEATER
REMOVABLE
C/L OF OVERFLOW
149mm REF.
(5-7/8)
79mm
INTEGRAL
(3-1/8)
SUPPORT
FEET
ROUGH
FLOOR
1-1/2 N.P.T.M. THREADS
1-1/2 O.D.TAILPIECE
GENERAL SPECIFICATIONS FOR 2908E WHIRLPOOL
INSTALLED SIZE
66 x 36 x 24-1/4 In. (1676 x 914 x 616mm)
WEIGHT
WEIGHT w/WATER
GAL. TO OVERFLOW
MIN. OPERATING GAL.
BATHING WELL AT SUMP
BATHING WELL AT RIM
WATER DEPTH TO OVERFLOW
FLOOR LOADING
(PROJECTED AREA)
PTS.
CUBE (FT
3
)
WHIRLPOOL ELECTRICAL SPECIFICATIONS
PUMP
GENERAL INSTALLATION INFORMATION
Carefully uncrate and inspect your new bath for any shipping damage. If such damage is found, report it to your vendor
immediately.
After inspection and during installation, protect the bath from construction damage. After installation, and before
enclosing with wallboard, tile, etc., water test the unit and check for leaks.
Do not make modifications to the whirlpool system or remove pump from factory mounting. This could adversely affect
the safety and performance of the whirlpool and void the warranty. Do not handle or move the whirlpool by the pump,
motor, or piping system.
Fittings (bath filler, shower arm, etc.) are not provided with the bath and must be ordered separately. Framing and
enclosing materials are provided by others. Check for availability of optional American Standard wall tiling bead
(required for recess installations).
Protect all finished surfaces of the whirlpool during construction and installation using a drop cloth.
WARNING! Do not lift whirlpool by the piping harness at any time.
FOR AFTER-SALES SERVICE CALL 1 (800) 442-1902 WEEKDAYS.
752859-100 Rev. E
2908E SERIES
WHIRLPOOL
INSTALLATION INSTRUCTIONS
1676mm
(66)
PROVIDE ACCESS
OUTLINE OF
TO PUMP FOR SERVICE
CUTOUT
ON ALL INSTALLATIONS
IN-LINE
73mm
LEVELING STRINGER
BLANK
(NOT FOR SUPPORT)
(2-7/8)
(24-1/4)
464mm
(18-1/4)
117mm
70mm
(4-5/8)
(2-3/4)
95 Lbs. (43 Kg.)
659 Lbs. (299 Kg.)
68 Gal. (257 L.)
55 Gal. (208 L.)
40 x 18 In. (1016 x 457mm)
53 x 28 In. (1346 x 711mm)
15 In. (381mm)
40 Lbs./Sq. Ft. (191 Kgs/Sq. m.)
23.8
44.5
1.6 HP, 9.7 AMPS, 120V .
THANK YOU...
for selecting an American Standard bath. Your new
PUMP
bath is shipped to you after careful inspection. The
whirlpool version is completely assembled with pump,
motor, and system piping. All you need to finish the
installation are your selected fittings and electrical
connections for a whirlpool.
To insure maximum performance and pleasure from
this product, please follow the instructions and
cautions.
List of Optional Components (not included):
• Flex-Jet Pulse Jet Kit*
• Flex-Jet Soft Jet Kit*
• E-Z-Install Heater*
616mm
List of Required Components (not included):
• Drain*
* see your Home Depot Retailer
List of Required Tools and Supplies:
Tools
• Level
• Tape Measure
• Pipe Wrench
• Slip Joint Pliers
• Screw Driver
• Standard
Woodworking Tools
• Personal Safety
Equipment
• Caulking Gun
• Bath Filler*
Supplies
• Nails
• Putty
• Caulking (waterproof)
• 1 x 3 or 2 x 2
Stringers
• Drop Cloth
• 15 amp GFI
Outlet
• Cement, Plaster,
Grout
© American Standard Inc. 2006
All product names listed herein are trademarks
of American Standard Inc. unless otherwise noted.