Air Comm Systems ACS 775SL-SP 설치 및 운영 매뉴얼 - 페이지 5

{카테고리_이름} Air Comm Systems ACS 775SL-SP에 대한 설치 및 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Air Comm Systems ACS 775SL-SP 9 페이지. Single audio mixer panel

ACS 775SL-SP Installation and Operations

Manual Interface Schematic

Connector Pin-out

The ACS 775SL-SP wiring harness should be constructed of Tefzel aircraft wire (M22759/16 grade

or better). Power and ground wires should be 18 or 20 AWG, and all other wires may be 22 AWG.

Shielded wires should be used where noted. Adequate protection against wear and chafing should be

taken by using a braided cable sleeving or jacket. Before completing installation, verify that all cable

connector pins are seated properly and that the connector is securely mounted to the unit mating

connector. Important - please note the power of the unit before installing; it will be either 14VDC or

28VDC and clearly marked as such on the units data tag.

Pre-fabricated cable harnesses are available from Air Comm to expedite installation - consult our

sales department for details.

Air Comm Systems, Inc.

Page 5