American Standard Savona Elite 2901E 사양 시트
{카테고리_이름} American Standard Savona Elite 2901E에 대한 사양 시트을 온라인으로 검색하거나 PDF를 다운로드하세요. American Standard Savona Elite 2901E 2 페이지. 6’ whirlpools by american standard high gloss acrylic
페이지 인쇄
SAVONA ELITE™ 6' WHIRLPOOL
Comfortable two person design with generous
back support positions andf molded-in armrests
2901E (specify White 020, Bone 021, or
Linen 222)
• Acrylic with fiberglass reinforcement
• 2.0 HP self-draining pump/motor
with dry run seal
• Ten multi-directional and flow adjustable
jets including:
Two high performance Ideal-flow™ Jets
Eight interchangeable Flex-jets™
• Three silent air volume controls
• Deck-mounted On/Off control
• Complete factory installed and tested
whirlpool system
2901EC (specify White 020, Bone 021, or
Linen 222)
• Same as above with the StayClean™
whirlpool system featuring Antimicrobial
AlphaSan®
Nominal Dimensions: 71-1/4" x 43-1/2" x 22"
(1810 x 1105 x 559mm)
Components Needed:
Bath Filler*: (specify finish)
Bath Drain: BATH-DRAIN
(specify Chrome 002, Polished Brass 099,
or Satin 295)
Custom Accessories Available:
Pulse Jet Kit: PULSE-JET (two per kit, specify
White 020, Bone 021, or Linen 222)
Soft Jet Kit: SOFT-JET (two per kit, specify
White 020, Bone 021, or Linen 222)
E-Z-Install™ Whirlpool Heater - EZHEAT-100
Tile Bead Kit: TILE-BEAD
* See American Standard Faucet Selector
Revised 10/03
WHIRLPOOLS BY AMERICAN STANDARD
Compliance Certifications -
Meets or Exceeds the Following Specifications:
• Underwriters Laboratories - Hydromassage
Bathtubs UL 1795
• ASME A112.19.7M for Whirlpool Appliances
• ANSI Z124.1 for Plastic Bathtubs
• ASTM E162 for Flammability
• NFPA 258 for Smoke Density
NOTE: Roughing-in dimensions and product specifica-
tions shown on reverse side of page.
NOTE: E-Z-Install™ Whirlpool Heater is designed to
maintain water temperature during operation. It will not
heat cold water to desired bathing temperature.
SPS 2901E
© 2003 American Standard Inc.
SAVONA ELITE™ 6'
HIGH GLOSS ACRYLIC
HD-005