American Standard TOWN SQUARE 2748 설치 매뉴얼 - 페이지 11
{카테고리_이름} American Standard TOWN SQUARE 2748에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. American Standard TOWN SQUARE 2748 17 페이지. American standard bathing pool installation guide
American Standard TOWN SQUARE 2748에 대해서도 마찬가지입니다: 사양 시트 (2 페이지)
페이지 인쇄
DRAIN CONNECTION
8. Have assistant take drain assembly from step 6 and place over back surface of drain hole to engage the metal strainer bolt.
Secure plastic drain base to metal strainer in drain opening using nut driver shaft. DO NOT OVER TIGHTEN! Carefully
remove excess silicone from acrylic surface as directed by silicone sealant directions.
9. From unit back side, overflow nut should be in alignment with overflow opening, as shown in photo F.
Overflow nut
10. Slide air bath fitting nut, washer and gasket onto air bath fitting as shown in photos G and H.
G.
Air bath
fitting
11. Assemble air bath fitting to plastic drain base as shown in photos I, J, K and L. Hand tighten nut to create watertight joint.
I.
K.
continued...
F.
H.
J.
L.
11
O-ring
754063-100 Rev. B