Canon VC-C4 사용 설명서 - 페이지 20
{카테고리_이름} Canon VC-C4에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Canon VC-C4 36 페이지. Canon communication camera instruction manual vc-c4, vc-c4r
Canon VC-C4에 대해서도 마찬가지입니다: 핀 할당 매뉴얼 (1 페이지)
페이지 인쇄
Controlling the Camera from the Wireless Controller
Storing a Preset Camera Position
This section describes how to store a camera head angle, zoom position and brightness level.
Up to nine (1 to 9) preset positions can be stored. Switching the power off or the camera off does
not erase the stored preset positions.
BRIGHT
ZOOM
W
HOME
SET/OK
CANCEL
1
2
AF
4
5
MF
7
8
0
ON SCREEN
Fn
ID
MENU
MEMO
20
To store a position
1. Set the camera head angle, zoom position and brightness.
T
The focus setting is not stored.
2. Press the s button.
The LED on the camera blinks green (at 0.5-second intervals).
Press the c button again to cancel the operation.
3
6
3. Press a button from 1 to 9.
9
When the position has been stored, the LED on the camera
stops blinking and remains green.
Any existing preset information is overwritten.
To restore a preset position
Press a button from 1 to 9.
The VC-C4/VC-C4R returns to the stored camera head angle,
zoom position and brightness level.
During preset operations, the camera pans and tilts at the speeds set for pan/
tilt operation in the setting menu. When the "AUTO" setting is selected, the
head moves at the maximum speed (
Stored preset position information can only be overwritten. Stored preset
positions cannot be erased. However, the preset position is cleared if the
COMMAND mode is changed.
If the camera is in manual focus mode, the focus may be incorrect when a
preset position is restored. In this event, set the camera to auto-focus mode or
focus the camera manually.
P.25).