Da-Lite ADVANTAGE DELUXE ELECTROL 지침서 - 페이지 2

{카테고리_이름} Da-Lite ADVANTAGE DELUXE ELECTROL에 대한 지침서을 온라인으로 검색하거나 PDF를 다운로드하세요. Da-Lite ADVANTAGE DELUXE ELECTROL 8 페이지. Automatic electric projection screen
Da-Lite ADVANTAGE DELUXE ELECTROL에 대해서도 마찬가지입니다: 사양 (2 페이지), 지침서 (12 페이지), 사양 데이터 (2 페이지), 지침서 (12 페이지), 지침서 (12 페이지), 지침서 (9 페이지)

페이지 인쇄

When using your video equipment, basic safety precautions should always be followed, including the

following:

1. Read and understand all instructions before using.

2. Position the cord so that it will not be tripped over, pulled, or contact hot surfaces.

3. If an extension cord is necessary, a cord with a current rating at least equal to that of the appliance

should be used. Cords rated for less amperage than the appliance may overheat.

4. To reduce the risk of electric shock, do not disassemble this appliance. Contact an authorized

service dealer when repair work is required. Incorrect reassembly can cause electric shock when

the appliance is used subsequently.

5. The use of an accessory attachment not recommended by the manufacturer may cause a risk of

fire, electric shock, or injury to persons.

PRE-INSTALLATION

1. Carefully unpack screen and remove outer wrapping from case.

2. Make sure to recheck measurements of screen location before installation.

CASE INSTALLATION

1. The case provides multiple attachment points for bolts, cables, or threaded rod. Page 5 shows threaded rod

installed. The variable position-mounting bracket may be located anywhere along the length of the case. It is

recommended to keep the brackets spaced evenly enough to distribute the weight of the screen.

The case has a self-trimming flange around the bottom. Ceiling tiles or drywall may be placed on top of this flange

to provide a finished appearance.

2. After securing the case in the ceiling check that the case is level and plumb.

3. Install electrical connections that apply to your unit. Review the wiring diagrams on pages 3 and 4 for proper

installation. If your screen has the built in SCB-100 or SCB-200, please refer to separate instructions.

IMPORTANT SAFETY INSTRUCTIONS

SAVE THESE INSTRUCTIONS

SCREW FOR

SECURING ROLLER

ACCESS DOOR

FABRIC DOOR

ACCESS

DOOR

FIGURE 1