American Standard ACTICLEAN 7381557-400.0070A 어셈블리 - 페이지 2

{카테고리_이름} American Standard ACTICLEAN 7381557-400.0070A에 대한 어셈블리을 온라인으로 검색하거나 PDF를 다운로드하세요. American Standard ACTICLEAN 7381557-400.0070A 3 페이지. Flush valve

페이지 인쇄

American Standard ACTICLEAN 7381557-400.0070A 어셈블리

FLUSH VALVE ASSEMBLY

P/N: 7381557-400.0070A

TO RE-INSTALL:

• Install the valve, orient valve assembly so

overflow funnel is positioned towards the

back of the tank (see FIGURE 4)

• Hold the valve in the tank with one hand

• Place friction washer over threads on bottom

of the tank (see FIGURE 5)

• Attach nut; orientation tabs must face away

from tank (see FIGURE 6)

• Use supplied tool to tighten nuts to tank

bottom, at least one hand tight

• Apply and work gaskets around the 6

retaining tabs on the nut so the inner rib on

the gasket is captured between the tabs and

the tank. Note the inner rib on the gasket is

offset to one side. Be sure to orient the

gasket with the inner rib towards the bottom

of the tank. When done correctly, the gasket

should not be compressed and should be

held in place while installing the tank.

• Re-mount tank to bowl (see FIGURE 1)

• Re-attach the refill tube into the overflow

funnel connection of the new valve

• Insert the BLACK trip lever arm in to the

chain coupler of the bead chain; push the

clevis pin through the arm and insert the hair

pin (see FIGURE 3)

• Insert the RED trip lever arm in to the yoke

of the teeter bar; push the clevis pin through

the arm and insert the hair pin (see FIGURE

----------------------------------------------------------------

Product names listed herein are trademarks of AS America Inc.

----------------------------------------------------------------

ACTICLEAN

FIGURE 4

7302224-100 (06/16)

™