American Standard Advanced Clean 3.0 SpaLet 설치 매뉴얼 - 페이지 11
{카테고리_이름} American Standard Advanced Clean 3.0 SpaLet에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. American Standard Advanced Clean 3.0 SpaLet 18 페이지. Bidet seat
페이지 인쇄
Installation
1. Required tools
Have the following tools for installing this
product: adjustable end wrench, Phillips head
screwdriver, flat-blade screwdriver.
2. Install the junction fitting
(1) Close the toilet water shut-off valve fully.
(2) Flush the toilet and empty all the water
from the toilet tank.
(3) Place a wash bowl or other container
underneath the tank water supply hose.
Then loosen the box nut on the toilet tank
inlet side and remove it.
CAUTION
• Be careful not to damage the tank water supply hose.
(4) Place the packing in the junction fitting
box nut and connect the toilet tank inlet
to the junction fitting.
CAUTION
• Do not overtighten the nut.
(5) Insert the packing in the tank water
supply hose box nut and connect the tank
water supply hose to the junction fitting.
CAUTION
• Do not overtighten the nut.
Tank Water Supply
Hose
Water
Shut-off
Valve
Packing
Junction Fitting
Tank Water
Supply Hose
Water
Shut-off
Valve
-11 - EN-
Bowl Cock Side Box Nut
Close
Tank Inlet
Box Nut
Packing