Canon XF300 지침

{카테고리_이름} Canon XF300에 대한 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Canon XF300 2 페이지. Canon xf300 professional camcorder
Canon XF300에 대해서도 마찬가지입니다: 브로셔 (27 페이지), 사용자 설명서 (2 페이지), 사용 설명서 (38 페이지), 지침 (2 페이지), 지침 (2 페이지), 사양 (6 페이지), 설정 및 문제 해결 지침 (2 페이지)

페이지 인쇄

Canon XF Plugin for Avid Media Access

Instructions

This plugin was created to allow you to easily link the clips you recorded using the camcorder to your Avid non-linear

editing system. The plugin uses Avid Media Access (AMA) architecture to link the clips in the camcorder or on a CF

card directly into a bin in Avid Media Composer or NewsCutter (collectively referred to as 'editing software'). Refer

also to the instruction manuals of the editing software used.

Preparations

This plugin is compatible with Media Composer, version 4.0.5 or later* and NewsCutter, version 8.0.5 or later*.

Complete the following preparations before using this plugin.

* As of May 2010, clips that were recorded using the 50 Mbps (4:2:2), 1280x720, 24P video configuration are not supported. Also, clips recorded

using the 25 Mbps (4:2:0), 1440x1080, 30P video configuration will be treated as 60i clips. To edit a video project as a 30p project, please use

clips recorded using the 50 Mbps (4:2:2), 30P or 35 Mbps (4:2:2), 30P video configurations.

When using Media Composer 4.x.x or NewsCutter 8.x.x only Download and install the following plugin offered by

Avid: Avid AMA MXF Plug-in.

For details, refer to Avid's Web page.

Start up the editing software and check the AMA settings. Make sure that the Enable AMA Volume

Management option is checked.

Linking clips directly from the camcorder or from a CF card

Using AMA architecture, you can link clips to the editing software directly from a CF card inserted into a card reader

connected to your computer. You can also connect the camcorder to the computer using a USB cable to link clips

directly from the camcorder.

For details about linking media with AMA, refer to the instruction manuals of the editing software used.

Start up the editing software.

Connect the camcorder or the CF card to the computer.

• CF card: Connect a commercially available card reader compatible with CompactFlash memory cards to the

computer and insert the CF card into the card reader.

• Camcorder:

Power the camcorder using the compact power adapter.

Turn on the camcorder and set in MEDIA mode.

Connect the camcorder to the computer using a USB cable. Use the optional IFC-400PCU USB cable or

similar mini-B USB cable.

• The editing software will automatically scan the CF card or the camcorder and link the clips into a bin (based

on the software's AMA settings). The Bin window will open and show the linked clips.

Continue the editing operation in the editing software.

Consult the software's guides and help files as necessary.

When you finish editing the clips, use the Safely Remove Hardware function to terminate the connection to

the hardware.

Disconnect the card reader or camcorder form the computer and remove the CF card.

Windows

Version 1.0