Air Comm Systems ACS 2010 작동 및 설치 매뉴얼 - 페이지 6

{카테고리_이름} Air Comm Systems ACS 2010에 대한 작동 및 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Air Comm Systems ACS 2010 10 페이지. Single audio mixer panel
Air Comm Systems ACS 2010에 대해서도 마찬가지입니다: 작동 및 설치 매뉴얼 (10 페이지)

페이지 인쇄

ACS 2010 Operations and Installation Manual

Front Panel Controls

( See Figure 1 — Page 8 lor pictorial)

■ 1 - Norm - Emer Switch

This switch controls the operations of the audio panel in the event of an audio amplifier failure. In the "up"

position (NORM) the audio panel is in normal operating mode. In the "down" position (EMER) all audios are

summed and then fed directly to the headphones. This enables the use of the transmitters and other

equipment during audio amplifier failure.

- 2 - QUICK ADJUST Adjustable Receive Audio Volume - On/Off Pots

Any Receive audio can be selected and muted using innovative new QUICK ADJUST volume pots. A

receive audio is selected by pulling out the knob toward the operator. With the receive audio activated, the

headphone volume of the audio can then be adjusted to the desired level. Turning the knob in a clockwise

direction increases the volume level, and turning in the counter-clockwise direction decreases the volume

level. To mute the receive audio, the knob only needs to be pushed back in. The volume for that audio

remains set at the desired level and does not need to be reset the next time it is selected.

■ 3 - ICS Volume Control

This knob adjusts ICS headphone volume. Clockwise rotation increases the volume - counter clockwise

rotation decreases the volume.

■ 4 - Lighting

The audio panel is lit by two 28V lamps ( P/N 327 ) which provide night time visibility for all panel legends.

These lamps can be replaced in the event of a failure by unscrewing the front panel mounted filter cap,

inserting a new lamp, and reinserting the filter into the front panel.

Air Comm Systems, Inc.