Da-Lite IDEA Panoramic 지침서 - 페이지 4
{카테고리_이름} Da-Lite IDEA Panoramic에 대한 지침서을 온라인으로 검색하거나 PDF를 다운로드하세요. Da-Lite IDEA Panoramic 12 페이지.
Da-Lite IDEA Panoramic에 대해서도 마찬가지입니다: 지침서 (12 페이지), 지침서 (8 페이지)
페이지 인쇄Assembly Instructions for Panoramics with 24" Marker Tray
1.
Carefully unpack unit and place all panels on top of the clean
work area. The viewing surface of each panel must face down.
2. Slide all three panels together, aligning the both the top and
bottom frames (Figure 1).
3. Find (1) seam brace and remove the release liner from both strips
of adhesive tape.
4. Ensuring that the panels are still in alignment, line up the seam
brace with one of the panel seams with adhesive side facing
down. Do not press adhesive into panels yet. Maintain at least a
small gap between the adhesive and the panel.
4
Figure 1
10-32 Nuts
Seam Braces
Figure 2
5. Use ⅜" open wrench or socket driver and (4) 10-32 nuts to attach
seam brace onto the studs on the top and bottom of screen
frame at the panel seam. Tighten all four nuts once attached to
the frame (Figure 2).
NOTE: For optimal seam alignment, hold the panels together
tightly while the seam brace is being adhered and the lock nuts
are being tightened.
6. Press adhesive into panels. Apply steady pressure along the
length of the seam brace to attach firmly.
7. Repeat Steps 3-6 to attach the other seam brace.