Da-Lite Model B 지침서 - 페이지 2

{카테고리_이름} Da-Lite Model B에 대한 지침서을 온라인으로 검색하거나 PDF를 다운로드하세요. Da-Lite Model B 4 페이지. With csr (controlled screen return)
Da-Lite Model B에 대해서도 마찬가지입니다: 운영 지침 (4 페이지), 지침서 (2 페이지)

페이지 인쇄

Installation

Care in mounting and care in correct operation will mean a long

and satisfactory life for your Da-Lite wall/ceiling screen. Locate

the screen where the audience can best see it and where other

furnishings in the room permit. Mount the screen so that bottom

of picture surface, when fully extended, will be above the heads

of viewers.

Protect Your Screen by keeping it rolled in its protective case

when not in use. Always examine both front and back of surface

before re-rolling into case to make certain screen is free of dust,

dirt or other foreign matter. Use a very soft duster to gently

remove any foreign particles.

Built-In-Hangers

Da-Lite wall/ceiling screens may be mounted on a wall, map rail,

suspended from ceiling or extension brackets. Wall screens must

be mounted level and with the case-back parallel to the wall.

For Wall Mounting

Use the keyhole slot at the back of the hanging bracket for flush

wall suspension. Position screws or other fasteners into the wall

and hang screen by using the slots.

For Map Rail Mounting

Use keyhole slots in flat brackets. Do not use "D" rings.

For Ceiling Suspension

If the screen is to be ceiling mounted, two screw hooks should

be placed in a beam or other solid surface. For drop ceilings,

Da-Lite's T-Bar Clips may be purchased.

For

Wall

For

Ceiling