Da-Lite Parallax 지침서 - 페이지 7

{카테고리_이름} Da-Lite Parallax에 대한 지침서을 온라인으로 검색하거나 PDF를 다운로드하세요. Da-Lite Parallax 8 페이지.

Installation Method 2 (Screens Over 80" Up To 96" In Viewing Width)

1. Secure the wall bracket to wall studs at the desired height.

Make sure the bracket is level. The top of the frame will be

1/8" above the top of the wall bracket when mounted. You will

need at least 5/8" clearance above the bracket to hang the

screen. Figure 8 and 9 show the proper orientation for the

supplied wall brackets.

Figure 8

Installation Method 3 (Screens Over 96" In Viewing Width)

1. Secure the wall brackets to wall studs at the desired height.

Make sure the brackets are level. The top of the frame will be

1/8" above the top of the wall bracket when mounted. You will

need at least 5/8" clearance above the bracket to hang the

screen. Figure 9 and 10 show the proper orientation for the

supplied wall brackets.

Figure 10

Large Wall

Bracket

2-Pieces

Large Wall

Brackets

3-Pieces

2. To install the bottom large wall bracket, you must measure

the overall height of the screen frame and subtract 1/2". This

is the dimension from the top of the upper wall bracket to the

bottom of the bottom wall bracket. See Figure 9.

3. Position the screen with the attached surface onto the top

wall bracket as shown in Figure 9. Push down at the center

of the bottom frame rail to hook onto the lower wall bracket.

Overall Height

Figure 9

2. To install the bottom large wall bracket, you must measure

the overall height of the screen frame and subtract 1/2". This

is the dimension from the top of the upper wall bracket to

the bottom of the lower wall bracket. See Figure 9.

3. Position the screen with the attached surface onto the top

wall bracket as shown in Figure 9. Push down at the center

of the bottom frame rail to hook onto the lower wall bracket.

Overall Height Less 1/2"