American Standard Champion 4 MAX Right Height 231BA Series 설치 지침 매뉴얼 - 페이지 2
{카테고리_이름} American Standard Champion 4 MAX Right Height 231BA Series에 대한 설치 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. American Standard Champion 4 MAX Right Height 231BA Series 8 페이지. 2-piece toilet
페이지 인쇄
ROUGHING-IN DIMENSIONS: NOTE: Distance from wall to closet flange centerline must be as listed below: 12" (305mm)
Champion
®
4 MAX 231AA Series Right Height
FINISHED WALL
30-1/4"
(768mm)
9-3/16"
(234mm)
18-1/2"
(470mm)
C/L OF SEAT POST HOLES
5-1/2" (140mm CENTERS)
9-3/8"
13-13/16"
(238mm)
(351mm)
12"
C/L OF OUTLET
(305mm)
Before You Start:
Turn Off Water Supply
Recommended fitting type for
back-to-back installations.
1
®
Elongated HET
17-3/8"
(441mm)
14"
(356mm)
SUPPLY
AS
REQ'D
16-1/2"
(419mm)
*10"
(254mm)
FINISHED
6"
FLOOR
(152mm)
10-9/16"
(268mm)
If Removing An Existing Toilet
Flush to remove
water from tank;
sponge remaining
water from
bowl before
removing toilet.
Depending upon your plumbing and venting conditions, the flow from the Champion
back-to-back installation may create a vacuum on the system and draw water from the opposing
bowl. The National Standards Plumbing Code prohibits the use of a cross fitting for drainage as
throw over is possible. The code does approve a directional "Y" style fitting with proper venting to
direct the water downward and away from the other toilet.
Champion
®
4 MAX 231BA Series Right Height
FINISHED WALL
9-3/16"
(234mm)
31-1/8"
(791mm)
9-3/8"
(238mm)
12"
(305mm)
BACK-TO-BACK INSTALLATION
2
Press firmly.
- 2 -
®
Round Front HET
28-1/4"
(718mm)
16-1/2"
(419mm)
C/L OF SEAT POST HOLES
5-1/2" (140mm CENTERS)
SUPPLY
AS
REQ'D
16-1/2"
(419mm)
*10"
(254mm)
13-7/16"
FINISHED
6"
(341mm)
FLOOR
(152mm)
C/L OF OUTLET
Clean Flange
Caution: If leaving floor flange
!
open for more than 1-2 hours,
cover flange to prevent escaping
sewer gases.
Wax Ring
(sold separately)
17-3/8"
(441mm)
14"
(356mm)
31-1/8"
(791mm)
10-9/16"
(268mm)
®
4 MAX in a
7 3 019 6 3 - 10 0