Da-Lite IDEA Panoramic 지침서 - 페이지 8

{카테고리_이름} Da-Lite IDEA Panoramic에 대한 지침서을 온라인으로 검색하거나 PDF를 다운로드하세요. Da-Lite IDEA Panoramic 12 페이지.
Da-Lite IDEA Panoramic에 대해서도 마찬가지입니다: 지침서 (12 페이지), 지침서 (8 페이지)

페이지 인쇄

Wall Mounting for Panoramics with Full Length Marker Tray

NOTE: The screen is shipped with four wall brackets and lengths

shipped vary by screen size. Two brackets will be used on the

center panel and one bracket on each of the side panels.

Measure gap on each side panel to determine which two

brackets will be used with these panels. These brackets will be of

an equal length. The remaining two brackets (also of an equal

length) will be used to hold the weight of the center panel. Use

appropriate mounting hardware for the wall type and to

accommodate for the screen's total hanging weight.

No More

than 5"

Secure the two center panel wall brackets to wall studs at the

desired height. The outside edge of each wall bracket must be no

greater than 5" away from the left or right panel seams. You will

need at least 1" clearance above the drilled holes to hang the

screen.

2. Secure the two side panel wall brackets to wall studs at the height

selected in Step 1. Each side panel wall bracket should be

centered between the seam brace and left or right outside edge

of the frame when mounted to the wall (Figure 7).

NOTE: Do not proceed if all four brackets are not level with each

other or a gap may appear between each of the panels when

mounted.

Wall Brackets

Screws (Not Supplied)

Figure 7

No More

than 5"