American Standard Heritage VorMax Right Height 205AA104 설치 지침 관리 및 유지보수 - 페이지 2
{카테고리_이름} American Standard Heritage VorMax Right Height 205AA104에 대한 설치 지침 관리 및 유지보수을 온라인으로 검색하거나 PDF를 다운로드하세요. American Standard Heritage VorMax Right Height 205AA104 5 페이지. Elongated 2-piece toilet
페이지 인쇄
ROUGHING-IN DIMENSIONS:
NOTE: Distance from wall to closet flange
centerline must be as listed:
Installation video can be found at: http://www.americanstandard-us.com/vormaxtoilet
Before You Start:
Turn Off Water Supply
Recommended fitting type for
back-to-back installations.
1
7302187-100
FINISHED WALL
30-1/4"
(768 mm)
9"
(229 mm)
18-1/2"
(470 mm)
C/L OF SEAT POST HOLES
140mm (5-1/2" CENTERS)
7-5/8"
15-1/16"
(194 mm)
(383 mm)
12"
C/L OF OUTLET
(305 mm)
If Removing An Existing Toilet
Flush to remove
water from tank;
sponge remaining
water from
bowl before
removing toilet.
Depending upon your plumbing and venting conditions, the flow from the toilet in a back-to-back
installation may create a vacuum on the system and draw water from the opposing bowl. The
National Standards Plumbing Code prohibits the use of a cross fitting for drainage as throw over
is possible. The code does approve a directional "Y" style fitting with proper venting to direct the
water downward and away from the other toilet.
30-13/16"
(782 mm)
SUPPLY
AS
REQ'D
16-1/2"
*10"
(419 mm)
(254mm)
*6"
FINISHED
(152mm)
FLOOR
Clean Flange
BACK-TO-BACK INSTALLATION
2
Press firmly.
2
19-3/4"
(501 mm)
14"
(356 mm)
11-5/8"
(296 mm)
Caution: If leaving floor flange
!
open for more than 1-2 hours,
cover flange to prevent escaping
sewer gases.
Wax Ring