Da-Lite 11 설치 지침 - 페이지 2
{카테고리_이름} Da-Lite 11에 대한 설치 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Da-Lite 11 2 페이지. Wall brackets
Da-Lite 11에 대해서도 마찬가지입니다: 설치 지침 (4 페이지)
페이지 인쇄No. 11 Extension Wall Brackets
•
Screen can be extended 10" or 14" from wall by selecting one of the two
mounting positions shown above.
No. 23 Extension Wall Brackets
•
Screen can be extended
181⁄4", 20" or 24" from wall by
selecting one of the two
mounting positions shown
above and wing nut and
bolt adjustment.
•
Extension arm holes should
be lined up with desired
holes in plastic bracket.
Attach extension arms to
wall brackets.
14" Position
Hex Nut (4)
Eye Bolt (2)
S-Hook (2)
10" Position
181⁄4" AND 24"
POSITIONS
Hex Nut (4)
Eye Bolt (2)
S-Hook (2)
20"
POSITION
Installation
Wall fasteners not included
•
Install eye bolts in wall brackets. Determine the height and location of the
screen to be mounted and mark. Measure the distance between the centers
of the 2 mounting rings on the screen. Transfer the measurement to the wall
and attach the wall brackets securely to the wall at those points.
•
Maximum recommended fastener size is 5 ⁄ 1 6 " diameter.
•
Do not overtighten fasteners.
•
Extension wall brackets are only to be used with screens weighing 75 pounds
or less.
•
Hang screen from the eye bolts with S-hooks.
Crimp both loops of S-hooks closed.
•
To provide proper tilt and eliminate keystoning pull the screen down, then
hook it back to the wall by attaching the bail handle to an accessory Tilt Lock,
Da-Lite part No. 40965. Tilt Lock is sold separately.