American Standard Madera 3464 설치 지침 매뉴얼 - 페이지 9
{카테고리_이름} American Standard Madera 3464에 대한 설치 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. American Standard Madera 3464 14 페이지. 16-1/2" height flush valve floor mounted toilets
American Standard Madera 3464에 대해서도 마찬가지입니다: 설치 지침 매뉴얼 (12 페이지)
페이지 인쇄
REPLACE BATTERY; Fig. 11, 11a
C
1. Loosen SET SCREW (1) with 2.5mm Hex Wrench (2) in
back of FLUSH VALVE COVER (3). Fig. 11.
2. Rotate COVER (3) to the right and pull off. Fig. 11.
3. Turn COVER (3) over and disconnect the SENSOR (4)
from the BATTERY HOLDER (5). Remove the BATTERY
CONTAINER (6) with BATTERY HOLDER (5) and
BATTERY (7) inside. Fig. 11a.
4. Remove BATTERY HOLDER (5) from BATTERY
CONTAINER (6). Fig. 11a.
5. Remove old BATTERY from BATTERY HOLDER (5).
Install the new BATTERY (7) making sure the shape
of the BATTERY follows the shape of the BATTERY
HOLDER (5). Fig. 11a.
6. Insert BATTERY HOLDER (5) with BATTERY into
BATTERY CONTAINER (6). Instert BATTERY
CONTAINER (6) into flush valve COVER (3). Fig. 11a.
7. Connect BATTERY HOLDER (5) to SENSOR (4) and
reverse the above steps to assemble flush valve. Fig. 11a.
REPLACE LONG LIFE POWER
D
PACK; Fig. 11, 11b
1. Loosen SET SCREW (1) with 2.5mm Hex Wrench (2) in
back of FLUSH VALVE COVER (3). Fig. 11.
2. Rotate COVER (3) to the right and pull off. Fig. 11.
3. Turn COVER (3) over and disconnect SENSOR (4) from
LONG LIFE POWER PACK (8). Fig. 11b.
4. Remove old LONG LIFE POWER PACK (8) and insert
new unit. Fig. 11b.
5. Connect new LONG LIFE POWER PACK (8) to SENSOR
(4). Reverse the above steps to assemble flush valve.
Fig. 11b.
Fig. 11
1
2
Fig. 11a
STANDARD BATTERY
3
6
5
Fig. 11b
LONG LIFE POWER PACK
3
8
7
REMOVE OLD
INSTALL
BATTERY
NEW
BATTERY
- P 2
C R
- P 2
C R
7
REMOVE
BATTERY
HOLDER
6
4
REMOVE OLD
LONG LIFE
POWER PACK
INSTALL NEW
LONG LIFE
4
POWER PACK
M965646 REV. 1.4 (7/15)
3
5
5
8