Canon 2711B054AA - imageCLASS D480 Laser All-in-One Printer 사용자 설명서 - 페이지 14
{카테고리_이름} Canon 2711B054AA - imageCLASS D480 Laser All-in-One Printer에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Canon 2711B054AA - imageCLASS D480 Laser All-in-One Printer 44 페이지. Canon imageclass mf4350d: user guide
페이지 인쇄
2 Set Up the Machine
Connect Power Cord and Turn On the Machine
1
Connect the power cord into the rear socket on
the back side of the machine and the wall
outlet, and press the [I] side of the main power
switch (A) to turn ON.
Do not connect the machine and the computer with a USB
cable at this time. Connect the machine and the computer
with a USB cable only during the software installation
procedure. (A USB cable is not used when the machine is
used via a network connection.)
2
The machine enters the standby mode.
1 0 0 %
T E X T / P H O T O
The LCD display turned OFF:
●
The machine may enter the Sleep mode while you are performing setup. Press
[Energy Saver] to turn the display back ON and continue the setup.
<SET PAPER AGAIN/SET TONER AGAIN> is displayed:
●
Make sure that the toner cover and scanning platform are closed properly. (See
"Install Toner Cartridge, " on p. 5.)
<CLOSE COVER/TONER COVER> is displayed:
●
Check the installation of the toner cartridge and the placement of the paper.
(See "Install Toner Cartridge, " on p. 5 and "Set Up Paper Cassette and Load
Paper, " on p. 8.)
12
L T R
1