Canon 3114C008 시작하기 - 페이지 5
{카테고리_이름} Canon 3114C008에 대한 시작하기을 온라인으로 검색하거나 PDF를 다운로드하세요. Canon 3114C008 47 페이지.
페이지 인쇄
3
When the following screen appears, use the [
and ] buttons to select a language, and then
press the OK button.
Important
If an error appears on the screen, see "If an error message
(support code) appears on the screen" on page 3 and
follow the instructions.
4
If the country or region selection screen
appears, use the [ and ] buttons to select
your country or region, and then press the OK
button.
6. Loading Paper
1
When the following screen appears, use the [
and ] buttons to select Yes, and then press the
OK button.
2
Remove the cassette from the printer.
3
Slide apart the paper guides.
•
Slide the right paper guide to the right edge. Align
the front paper guide with the Letter or A4 mark.
4
Load paper.
•
Load 2 or more sheets of Letter or A4 sized plain
paper with the print side facing down.
•
Place the paper against the front paper guide, and
align the right paper guide to the width of the paper.
a
5
Replace the cassette.
6
Pull out the paper output tray.
7
Follow the on-screen instructions, and then
press the OK button.
•
Check the support code, and then follow the
instructions if the displayed code is written below.
•
•
•
•
b
For all other cases, refer to the Online Manual.
Check that Ready to connect appears on the
printer's screen.
If an error message (support code) appears on
the screen
1890
The protective materials are not removed.
"2. Removing Packing Materials" on page 1
1470
The print heads are not installed correctly.
"3. Installing the Print Heads" on page 1
1471
No print heads are installed.
"3. Installing the Print Heads" on page 1
1642
There may be insufficient ink.
"4. Pouring Ink" on page 2
Support code
3