eKey Home 사용 설명서 - 페이지 10
{카테고리_이름} eKey Home에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. eKey Home 17 페이지.
eKey Home에 대해서도 마찬가지입니다: 사용 설명서 (20 페이지)
페이지 인쇄Installation
Mount and cable the product correctly before connecting power.
Possible property damage!
Do not connect the power supply beforehand!
Mount the system in accordance with the supplied mounting instructions.
Cable the system in accordance with the supplied wiring diagram.
Step
Action
1.
Ensure safe installation
of the devices. Close
the covers.
2.
Connect the power
supply to the mains.
3.
No action required.
4.
If the LEDs fail to light
up, check the wiring
and power supply.
Implementation
Implementing the devices enables storage of the administrator fingers.
The administrator fingers serve exclusively for programming the system.
In contrast to the user fingers, they cannot be used to open doors. The
following steps apply to the
carried out automatically for the
Step
Action
1.
2.
No action
required.
The finger scanner is ready to record the administrator fingers.
ATTENTION
Display
-
-
ekey home CP mini 1
ekey home CP micro 1
Description
Press and hold the button with the
operating rod for 1 sec. The upper status
LED flashes green.
The status LED lights up orange, the
function LEDs flash green:
ekey home CP mini 1
Only for
The upper status LED on the control
panel flashes red: default setting.
The status LED on the finger scanner
lights up orange, the function LEDs
flash green: default setting.
only. These steps are
.
:
Implementing
the devices
Display
en│9