eKey home KNX RS-485 사용 설명서 - 페이지 8

{카테고리_이름} eKey home KNX RS-485에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. eKey home KNX RS-485 20 페이지.

Installation

Mount and wire the product correctly before connecting power.

Possible property damage!

Do not connect the power supply beforehand!

Mount the system in accordance with the supplied mounting instructions.

Wire the system in accordance with the supplied wiring diagram.

The wiring diagram displays the wiring of the ekey home converter KNX

RS-485. Refer to the wiring diagram for the finger scanner for the wiring

of the ekey home finger scanner and the lock.

Extensive specialist knowledge is needed to configure a KNX system.

Commissioning should be carried out by a KNX specialist.

The ekey home converter KNX RS-485 is ready for operation once the

wiring configuration has been carried out and it has been connected to the

power supply.

The KNX LED lights up green. The RS-485 LED flashes green irregularly.

The ETS5 engineering tool software and the required hardware

components are used to configure the ekey home converter KNX RS-485.

The ekey home converter KNX RS-485 is a KNX-certified device and can

be found in the device database of the KNX organization using the ETS5.

ATTENTION

NOTICE

en│7