Canon Color imageCLASS MF8080Cw 시작 설명서 - 페이지 22
{카테고리_이름} Canon Color imageCLASS MF8080Cw에 대한 시작 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Canon Color imageCLASS MF8080Cw 40 페이지. Color laser multifunction printer
Canon Color imageCLASS MF8080Cw에 대해서도 마찬가지입니다: 구성 매뉴얼 (46 페이지), 브로셔 및 사양 (4 페이지)
페이지 인쇄
Installing via Network Connection
1.
Check the following
points.
2.
Turn on the computer, and then log on as a user with
administrative privileges.
If you have already logged on, exit all applications which are running.
3.
Install the MF Drivers and MF Toolbox.
* When you are in an IPv6 environment, or when installing the UFRII LT (XPS) printer driver using network connection, you cannot use the
procedure below to install the software. Refer to "Installing the MF Drivers on the WSD Network" in the e-Manual to install the MF Drivers.
* You may not use the scan function in the IPv6 environment.
Insert the CD-ROM.
If the top screen does not appear
•
Windows 2000, XP, and Server 2003
1. From the [Start] or [start] menu, select [Run].
2. Enter "D:\Minst.exe", and then click [OK].
•
Windows Vista, 7, and Server 2008
1. Enter "D:\Minst.exe" in [Search programs and files] or [Start
Search] under the [Start] menu.
2. Press the [ENTER] key on the keyboard.
* The CD-ROM drive name is indicated as "D:" in this manual. The CD-ROM
drive name may differ depending on the computer you are using.
22
• The computer and machine are connected via the network.
• The power of the machine is turned ON.
• IP address is properly set up.
Read the contents of the License
Agreement.
Click.
Proceed to "Checking the IP Address" on p. A-3.
Click.
[Easy Installation] performs the installation of the
following software.
•
Printer driver
•
Fax driver
•
Scanner driver
•
MF Toolbox
To add the following software and manual to the
installation, select [Custom Installation].
•
Presto! PageManager
•
e-Manual
e-Manual "Installing the MF Drivers and MF Toolbox"
Click.
Click.
(For Windows)
* In Windows Server 2003/Server 2008, the
[Select the Type of Connection] screen is not
displayed. Proceed to Step
.
Click.