Canon Color imageCLASS MF8170c 네트워크 매뉴얼 - 페이지 16

{카테고리_이름} Canon Color imageCLASS MF8170c에 대한 네트워크 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Canon Color imageCLASS MF8170c 48 페이지. Color laser copier printer scanner fax with network
Canon Color imageCLASS MF8170c에 대해서도 마찬가지입니다: 설치 지침 (1 페이지), 추가 지침 (2 페이지), 사용 설명서 (8 페이지), 사용 설명서 (8 페이지), 원격 UI 매뉴얼 (40 페이지), 사양 (2 페이지)

페이지 인쇄
Canon Color imageCLASS MF8170c 네트워크 매뉴얼

Checking the Current Network Settings

You can check the network settings of the machine. Settings specified from the
operation panel become effective after the machine is restarted, after the procedure.
1
Press [Menu].
2
Press [ (-)] or [ (+)] to select <NETWORK SETTINGS> ➞ press
2
[Set].
3
Press [ (-)] or [ (+)] to select <VIEW IP ADDRESS> ➞ press [Set].
4
Press [ (-)] or [ (+)] to select <IP ADDRESS>, <SUBNET MASK>,
or <DEFAULT GATEWAY> for displaying the setting you want to
check ➞ press [Set].
5
Press [Stop/Reset] to return to the standby display.

Settings Using ARP/PING Commands

1
Start up the MS-DOS prompt or the Command prompt on your
computer.
2
Execute the following command to add a static entry to the arp
table.
arp -s <IP Address> <MAC Address>
IP Address:
MAC Address:
Input Example: arp -s 172.20.88.125 00-00-85-05-70-31
2-6
Preparation for Protocol Settings
Specify the IP address you want to allocate to the machine.
The IP address consists of 4 numbers ranging from 0 to 255,
using periods (.) as separators. (ie. 172.20.88.125)
Specify the MAC address of the machine. Every second digit
is separated by "-". (ie. 00-00-85-05-70-31)