Canon Color imageCLASS MF8170c 네트워크 매뉴얼 - 페이지 25

{카테고리_이름} Canon Color imageCLASS MF8170c에 대한 네트워크 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Canon Color imageCLASS MF8170c 48 페이지. Color laser copier printer scanner fax with network
Canon Color imageCLASS MF8170c에 대해서도 마찬가지입니다: 설치 지침 (1 페이지), 추가 지침 (2 페이지), 사용 설명서 (8 페이지), 사용 설명서 (8 페이지), 원격 UI 매뉴얼 (40 페이지), 사양 (2 페이지)

페이지 인쇄

Setting Up a Computer for Printing

After you have completed the protocol settings of the machine, you are ready to set

up each of the computers for printing.

■

Connecting to a TCP/IP Network

All computers that use the printer must have TCP/IP client software installed and must be

enabled for TCP/IP network use. For details, see the manuals provided with the operating

system.

■ Installing the Printer Driver and Specifying the Printer Destination Setting

To print from a computer, you must install a printer driver and specify a setting for the

printer destination. The printer destination setting differs depending on the print protocol

used for printing. Use the following information as a guide to determine the print protocol

you are using, and then perform the necessary operations.

•

LPD (Line Printer Daemon)

This is the print protocol generally used with TCP/IP. See "Printer Connection Method

(LPD/Raw)," on p. 2-16 to install the printer driver and to specify the printer destination

setting.

•

Raw

This is the print protocol used with Windows 2000/XP. It can print at higher speeds than

LPD. See "Printer Connection Method (LPD/Raw)," on p. 2-16 to install the printer driver

and to specify the printer destination setting.

NOTE

Configuration of Windows 2000/XP as a print server provides efficient management of

your network printer. For the detailed procedure, see "Print Server Settings," on p. 2-19.

Setting Up a Computer for Printing

2-15