Canon Color imageCLASS MF8180c 빠른 시작 매뉴얼 - 페이지 8
{카테고리_이름} Canon Color imageCLASS MF8180c에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Canon Color imageCLASS MF8180c 25 페이지. Color laser copier - printer - scanner - fax - network capabilities
Canon Color imageCLASS MF8180c에 대해서도 마찬가지입니다: 원격 UI 매뉴얼 (40 페이지), 네트워크 매뉴얼 (49 페이지), 시작 설명서 (35 페이지)
![Canon Color imageCLASS MF8180c 빠른 시작 매뉴얼](/uploads/products/server2/1123809/1123809.png)
13Close the cartridge cover and wait for the
cartridge cradle to rotate and stop, and then
open the cover again. Allow approximately
two seconds for the cartridge cradle to
rotate to the next receptacle.
The receptacles appear in this order: Yellow
> Magenta > Cyan > BlacK.
14Repeat steps 8 to 13 until all four toner
cartridges are installed.
NOTE
If the cartridge cover is closed during those steps or
●
the spent toner cartridge is not in the replacement
position, close the cover, then open it again when the
whirring sound stops. Repeat this process until the
cartridge you want to replace is in the correct
position.
Load paper.
1 Grasp paper cassette, pull it out completely,
and set it aside.
For each cartridge, match the color marking on the
●
cartridge receptacle in the machine to the color
marking on the cartridge itself.
15Close the cartridge cover and lower the
scanning platform. The LCD flashes PLEASE
WAIT until calibration is complete. Please
allow a few minutes for the machine to
calibrate itself.
2 Turn and pull out the shipping material, and
press the inner plate to set it on the bottom.
- 8 -