Canon Color imageCLASS MF8180c 시작 설명서 - 페이지 28

{카테고리_이름} Canon Color imageCLASS MF8180c에 대한 시작 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Canon Color imageCLASS MF8180c 35 페이지. Color laser copier - printer - scanner - fax - network capabilities
Canon Color imageCLASS MF8180c에 대해서도 마찬가지입니다: 원격 UI 매뉴얼 (40 페이지), 네트워크 매뉴얼 (49 페이지), 빠른 시작 매뉴얼 (25 페이지)

페이지 인쇄

Place the toner cartridge on a flat surface, then

pull out the sealing tape completely (approx. 45

cm in length) while supporting the toner

cartridge.

Hold the tab on the sealing tape and pull it out straight.

CAUTION

If the sealing tape is pulled out forcefully or stopped

at midpoint, toner may spill out.

If toner gets into your eyes or mouth, wash it away

immediately and consult a physician.

NOTE

• Do not pull the sealing tape diagonally, upwards, or

downwards. If the tape is severed, it may become

difficult to pull it out completely.

• Pull out the sealing tape completely from the toner

cartridge. If the sealing tape remains in the toner

cartridge, it may result in a deterioration in print quality.

• Dispose of the sealing tape according to local

regulations.

Press and hold the blue buttons on the top of

the toner cartridge and install it in the machine.

Keep the guides (A), (B) on both sides aligned with the

grooves (C), (D) (triangular mark) on the machine.

Please note that these arrows are just for alignment

purpose and do not represent the color of the toner.

When the toner cartridge is installed properly, the label

on the cartridge and on the toner cartridge holder will be

aligned.

Close the cartridge cover and lower the

scanning platform.

The toner cartridge holder will rotate automatically.

NOTE

• When you make copies immediately after replacing a

toner cartridge, the print quality may deteriorate. Make

copies after making sure the whirring sound stops.

∗

• When <INSERT

CARTRIDGE> still appears in the

LCD after inserting a cartridge, disconnect and

connect the power cord.

∗

Indicates either "C", "M", "Y", or "K".

• The color labels should appear in this order: Yellow >

Magenta > Cyan > Black. If the color you want does

not appear, start over from step 1 and select the

required color.