American Standard CADET 2771.002 사양 시트 - 페이지 2

{카테고리_이름} American Standard CADET 2771.002에 대한 사양 시트을 온라인으로 검색하거나 PDF를 다운로드하세요. American Standard CADET 2771.002 2 페이지. 5' x 36" whirlpool and bathing pool

페이지 인쇄
American Standard CADET 2771.002 사양 시트
305 mm
RECOMMENDED FITTING LOCATION
(12)
235 mm
(9-1/4)
19 mm
(3/4)
FINISHED
WALL
SEE FITTING
SPECS FOR
DIMENSIONS
229 mm
(9)
914 mm
(36)
CUTOUT IN FLOOR
457 mm
FOR DRAIN
(18)
C/L OF
57 mm
SUPPLIES
(2-1/4)
C/L OF DRAIN
OPTIONAL TO
FINISHED FLOOR
USUALLY BETWEEN
1651 & 1981mm
(65 & 78)
C/L OF
OVERFLOW
38 mm
(1-1/2)
76 mm
(3)
502 mm
(19-3/4)
ROUGH
FLOOR
INTEGRAL
SUPPORT
FEET
1-1/2 O.D.TAILPIECE
GENERAL SPECIFICATIONS FOR 2771 WHIRLPOOL
INSTALLED SIZE
60 x 36 x 19-3/4 In.(1524 x 914 x 502mm)
WEIGHT
WEIGHT w/WATER
GAL. TO OVERFLOW
MIN. OPERATING GAL.
BATHING WELL AT SUMP
BATHING WELL AT RIM
WATER DEPTH TO OVERFLOW
FLOOR LOADING
(PROJECTED AREA)
PTS.
CUBE (FT
)
3
WHIRLPOOL ELECTRICAL SPECIFICATIONS
SYSTEM I PUMP
NOTES:
BATH CAN BE INSTALLED EITHER ABOVE OR BELOW FLOOR LINE AS PIER, ISLAND, OR PENINSULA TYPE INSTALLATION. SUMP OF
BATH IS SUPPORTED BY INTEGRAL FEET. NO ADDITIONAL SUPPORT REQUIRED. ENCLOSING MATERIAL BY OTHERS.
■
REFER TO INSTALLATION INSTRUCTIONS SUPPLIED WITH WHIRLPOOL FOR ADDITIONAL INFORMATION.
OPTIONAL 3 WALL TILING BEAD. KIT AND APRON NO. 9260.018 OR 9360.018 AVAILABLE AND MUST BE ORDERED SEPARATELY.
●
FITTINGS NOT INCLUDED AND MUST BE ORDERED SEPARATELY.
PROVIDE SUITABLE REINFORCEMENT FOR ALL SUPPORTS.
●
IF INSTALLING A DECK-MOUNTED FITTING, BEFORE DRILLING ANY HOLES: CHECK FOR INTERFERENCE WITH CIRCULATING
SYSTEM PIPING, DRAIN OVERFLOW, AND APRON INSTALLATION. MOUNTING HOLES DRILLED BY INSTALLER.
IMPORTANT: Dimensions of fixtures are nominal and may vary within the range of tolerances established by ANSI Standard Z124.1
These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided leaflet.
© 2008 AS America Inc.
PROVIDE ACCESS TO PUMP FOR
SERVICING ON ALL INSTALLATIONS
1524 mm
(60)
64 X 330mm (2-1/2 x 13")
FOR PIER OR ISLAND
INSTALLATIONS ONLY
PUMP
(8) JETS
(2) AIR VALVES
OUTLINE OF CUTOUT
1486 mm x 876 mm
ALT. FITTING
(58-1/2 X 34-1/2)
LOCATION #1
C/L OF
SHOWER ARM
C/L OF
VALVES
C/L OF
305 mm
SPOUT
(12)
SAFE-T-HEATER
STRINGER
102 mm
REMOVABLE
(4)
BLANK
SUPPORT
464 mm
(18-1/4)
1-1/2 N.P.T.M.
THREADS
70 mm
(2-3/4)
117 mm
(4-5/8)
95 Lbs. (43 Kg.)
587 Lbs. (267 Kg.)
59 Gal. (224 L.)
48 Gal. (182 L.)
40 x 22 In. (1016 x 559mm)
52 x 29 In. (1321 x 737mm)
13-1/4 In. (337mm)
39 Lbs./Sq. Ft. (188 Kgs/Sq. m.)
1.6 HP, 9.7 AMPS, 120V.
WHIRLPOOL AND BATHING POOL
235 mm
(9-1/4)
19 mm
(3/4)
ON/OFF
FINISHED
SWITCH
WALL
SEE FITTING
SPECS FOR
DIMENSIONS
ALT. FITTING
LOCATION #2
64 x 330mm
(2-1/2 x 13")
914 mm
(36)
457 mm
(18)
C/L OF
SUPPLIES
OPTIONAL TO
FINISHED FLOOR
USUALLY BETWEEN
1651 & 1981mm
(65 & 78)
LEVELING
NOT FOR
GENERAL SPECIFICATIONS FOR 2771 BATHING POOL
INSTALLED SIZE
WEIGHT
WEIGHT w/WATER
GAL. TO OVERFLOW
BATHING WELL AT SUMP
BATHING WELL AT RIM
WATER DEPTH TO OVERFLOW
FLOOR LOADING
(PROJECTED AREA)
23.8
44.5
PTS.
CUBE (FT 3 )
H62
CADET™ 5' x 36"
1524 mm
(60)
305 mm
RECOMMENDED FITTING LOCATION
(12)
64 X 330mm (2-1/2 x 13")
FOR PIER OR ISLAND
INSTALLATIONS ONLY
229 mm
(9)
CUTOUT IN FLOOR
FOR DRAIN
57 mm
(2-1/4)
ALT. FITTING
LOCATION #1
C/L OF DRAIN
C/L OF
OVERFLOW
305 mm
38 mm
(12)
(1-1/2)
102 mm
67 mm
LEVELING STRINGER
(4)
(2-5/8)
NOT FOR SUPPORT
502 mm
(19-3/4)
ROUGH
FLOOR
1-1/2 N.P.T.M.
INTEGRAL
THREADS
SUPPORT
FEET
1-1/2 O.D.TAILPIECE
(1524mm x 914 mm x 502mm)
40 x 22 In. (1016mm x 559mm)
52 x 29 In. (1321mm x 737mm)
37 LBS./Sq. Ft. (180 Kgs/Sq. m.)
HIGH GLOSS
OUTLINE OF CUTOUT
1486 mm x 876 mm
(58-1/2 X 34-1/2)
C/L OF
SHOWER ARM
C/L OF
VALVES
C/L OF
SPOUT
464 mm
(18-1/4)
70 mm
(2-3/4)
117 mm
(4-5/8)
60 x 36 x 19-3/4 In.
70 Lbs. (32 Kg.)
562 Lbs. (255 Kg)
59 Gal. (224 L.)
13-1/4 In. (337mm)
23.8
44.5
Revised 2/08