Donaldson Torit TBI 30 설치 및 운영 매뉴얼 - 페이지 13

{카테고리_이름} Donaldson Torit TBI 30에 대한 설치 및 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Donaldson Torit TBI 30 20 페이지. Backward inclined fan

Damper and Silencer Support Bracket

Side and Top Mount

1. Attach the damper to the fan exhaust outlet using the

supplied hardware.

2. Attach the silencer adapter flange to the damper

using the bolts, washers and hex nuts supplied.

3. Apply sealant to the silencer adapter flange and

attach silencer to flange. Tighten all hardware.

Top Mount Support Brackets

1. Loosely assemble the silencer support brackets.

a. Align the pivoting support brackets to extend

a minimum of 30-inches from the collector and

mark the drill locations.

b. Drill pilot holes with a 0.339-in bit.

c. Screw brackets using 3/8-in thread-forming

bolts.

power pack

Side Mount

damper

silencer

Typical Side and Top-Mount Silencer and Damper Installation

Torit Backward Inclined Fan, TBI-3 through 30

Side Mount Support Brackets

Note:

Side mount silencer support brackets

require modification in the field.

1. Loosely assemble the silencer's support brackets

from silencer pack following procedure on the

silencer pack drawings.

a. Align the support bracket to the underside of the

silencer, flush with the cabinet wall and mark the

drill locations.

b. Drill pilot holes with a 0.339-in bit.

c. Secure brackets using 3/8-in thread forming

bolts.

2. Loosen the wing nut on the damper and adjust

position to restrict flow to design air volume.

silencer

damper

pivoting

bracket

power pack

Top Mount