EKHO EK-WL8-OV/AU 빠른 시작 매뉴얼 - 페이지 4
{카테고리_이름} EKHO EK-WL8-OV/AU에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. EKHO EK-WL8-OV/AU 9 페이지. Wireless optical smoke detector with build-in voice annunciator and visual alarm device
페이지 인쇄STFV.425238.037-AU-UM rev. 23
PROGRAMMING
The "Prog." (or "P") button on the device is used for initializing the device in the
system. Please refer to the translator manual for full instructions on how to add a
child device to the system. The device can also be initialized using the "Streletz-
Wizard" software.
INDICATION
The device has a three-color LED which indicates the state according to the
following rules.
LED indication
No indication or rare green flashes
Yellow flashes every 4 seconds
Red flashes every 2 seconds
When the device power on, it begins an automatic calibration process, which lasts
about a minute or less. This state is indicated with rare flashes of red LED.
SMOKE SENSITIVITY
In order to set smoke sensitivity level, you should do it in translator menu.
WL8-TRH
vXX/RFYY
Configuration
Maintenance
There are three sensitivity levels (High, Normal, Low) in depend on transparent air
inside of room (e.g. dust, vapor). It may help to reduce probability of false alarm.
Password
Radio
Signal line
Start Addr
EK-WL8-OV/AU
WIRELESS OPTICAL SMOKE
DETECTOR
WITH BUILD-IN VOICE ANNUNCIATOR
AND VISUAL ALARM DEVICE
20.08.2020
Device's state
Standby mode
Fault state – malfunctioning smoke sensor
Fire alarm
001 wl8-trh
002 wl8-ov
003 wl8-oh
Page 4 from 9
Delete
Edit
sensitivity
Init
Info
Photo
Normal
High
Low
4